Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

Ver Toda la documentación

634875

Sigma-Aldrich

Óxido de alúmina

single crystal substrate, <0001>

Sinónimos:

Alúmina

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Fórmula lineal:
Al2O3
Número de CAS:
1344-28-1
Peso molecular:
101.96
Número CE:
215-691-6
Número MDL:
MFCD00003424
Código UNSPSC:
12352303
eCl@ss:
38120402
ID de la sustancia en PubChem:
24882698
NACRES:
NA.23

descripción

Crystallographic D spacing ((0001) - c plane: 2.165 Angstrom)
Crystallographic D spacing ((1011) - s plane: 1.961 Angstrom)
Crystallographic D spacing ((1040) - m plane: 1.375 Angstrom)
Crystallographic D spacing ((1102) - r plane: 1.740 Angstrom)
Crystallographic D spacing ((1120) - a plane: 2.379 Angstrom)
Crystallographic D spacing ((1123) - n plane: 1.147 Angstrom)
single side polished

Nivel de calidad

100

Formulario

single crystal substrate

dureza

9 mohs

L × An × grosor

10 mm × 10 mm × 0.5 mm

mp

2040 °C (lit.)

propiedades de los semiconductores

<0001>

cadena SMILES

O=[Al]O[Al]=O

InChI

1S/2Al.3O

Clave InChI

TWNQGVIAIRXVLR-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Características y beneficios

Common substrate for III-V nitrides as well as many other epitaxial films.

Propiedades físicas

thermal expansion = 7.5 × 10-6 /°C; specific heat = 0.10 cal/°C; thermal conductivity = 46.06 @ 0 °C, 25.12 @ 100 °C, 12.56 @ 400 °C (W/m,K); dielectric constant = ~9.4 @ 300 K at A axis, ~11.58 @ C axis; loss tangent at 10 GHz < 2 × 10-5 at A axis, 5 × 10-6 at C axis

Forma física

Crystalline, hexagonal (a = 4.758 Å, c = 12.992)

Código de clase de almacenamiento

13 - Non Combustible Solids

Clase de riesgo para el agua (WGK)

nwg

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCT7636
MKCS8038
MKCS3960
MKCR7006
MKCQ9033

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

G Siddiqi et al.
Dalton transactions (Cambridge, England : 2003), 44(32), 14349-14353 (2015-07-23)
A simple one-step and gram-scale synthesis of [Au5Mes5] from AuCl3 was developed, and this molecular precursor was used to generate Au nanoparticles on SiO2 and Al2O3. While [Au5Mes5] does not react with surface silanols and is only physisorbed, its incipient
Joohoon Kang et al.
ACS nano, 9(4), 3596-3604 (2015-03-19)
Solution dispersions of two-dimensional (2D) black phosphorus (BP)--often referred to as phosphorene--are achieved by solvent exfoliation. These pristine, electronic-grade BP dispersions are produced with anhydrous organic solvents in a sealed-tip ultrasonication system, which circumvents BP degradation that would otherwise occur
Chien-Chih Lin et al.
Nanoscale, 5(17), 8090-8097 (2013-07-25)
We demonstrated a promising route for enhancing temperature sensitivity, improving saturation voltage, and reducing power consumption of the MOS(p) tunneling temperature sensors by introducing ultrathin Al2O3 into the dielectric stacks. Detailed illustrations of the working mechanism and device concept are
Jaakko Akola et al.
Proceedings of the National Academy of Sciences of the United States of America, 110(25), 10129-10134 (2013-06-01)
Glass formation in the CaO-Al2O3 system represents an important phenomenon because it does not contain typical network-forming cations. We have produced structural models of CaO-Al2O3 glasses using combined density functional theory-reverse Monte Carlo simulations and obtained structures that reproduce experiments
Colin J Ingham et al.
Biotechnology advances, 30(5), 1089-1099 (2011-08-23)
Porous aluminum oxide (PAO) is a ceramic formed by an anodization process of pure aluminum that enables the controllable assembly of exceptionally dense and regular nanopores in a planar membrane. As a consequence, PAO has a high porosity, nanopores with
Ver todos los artículos relacionados

Artículos

Dye-Sensitized and Perovskite Solar Cells

Continuous efficiency improvements in photovoltaic devices result from material advancements and manufacturing innovation.

Dye-Sensitized and Perovskite Solar Cells

Continuous efficiency improvements in photovoltaic devices result from material advancements and manufacturing innovation.

Dye-Sensitized and Perovskite Solar Cells

Continuous efficiency improvements in photovoltaic devices result from material advancements and manufacturing innovation.

Dye-Sensitized and Perovskite Solar Cells

Continuous efficiency improvements in photovoltaic devices result from material advancements and manufacturing innovation.

Ver todo

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico