Skip to Content
MilliporeSigma
  • In vitro antibacterial phenolic extracts from "sugarbag" pot-honeys of Australian stingless bees (Tetragonula carbonaria).

In vitro antibacterial phenolic extracts from "sugarbag" pot-honeys of Australian stingless bees (Tetragonula carbonaria).

Journal of agricultural and food chemistry (2014-11-26)
C Flavia Massaro, Daniel Shelley, Tim A Heard, Peter Brooks
ABSTRACT

Australian stingless bee honeys have been shown to exert antioxidant and in vitro antimicrobial properties; however their bioactive factors remained unidentified. This study investigated the antibacterial properties of phenolic extracts from Tetragonula carbonaria honeys. Honeys were harvested from beehives in three sites of South East Australia. Liquid-liquid extractions yielded the phenolic concentrates, for analyses by liquid and gas chromatography mass spectrometry. Antibacterial assays were conducted against Staphylococcus aureus and Klebsiella pneumoniae by in vitro agar diffusion and broth dilution assays. The phenolic extracts averaged to 5.87 mg/100 g of raw honeys, and constituents were 3-phenyllactic acid, lumichrome, diglycosylflavonoids, norisoprenoids. The honeys did not contain methylglyoxal, dihydroxyacetone or phenolics characteristic of Leptospermum nectars. Hydrogen peroxide content amounted up to 155.8 μM in honeys. Beside the bactericidal effects of hydrogen peroxide at 760 μM, other antibacterial factors were the phenolic extracts of "sugarbag" honeys that were active at minimum bactericidal concentrations of 1.2-1.8 mg/mL.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Hydrogen peroxide solution, contains inhibitor, 30 wt. % in H2O, meets USP testing specifications
Sigma-Aldrich
Hydrogen peroxide solution, contains inhibitor, 30 wt. % in H2O, ACS reagent
Sigma-Aldrich
Hydrogen peroxide solution, purum p.a., ≥35% (RT)
Sigma-Aldrich
Hydrogen peroxide solution, contains inhibitor, 35 wt. % in H2O
Sigma-Aldrich
Methanol, BioReagent, ≥99.93%
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Hydrogen peroxide solution, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
Hydrogen peroxide solution, 50 wt. % in H2O, stabilized
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, ≥99.9%
Supelco
Residual Solvent - Acetonitrile, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Ethanol, JIS first grade, 94.8-95.8%
Sigma-Aldrich
Acetonitrile solution, contains 10.0% acetone, 0.05% formic acid, 40.0% 2-propanol
Sigma-Aldrich
Methanol, suitable for HPLC
Sigma-Aldrich
Methanol, JIS special grade, ≥99.8%
Sigma-Aldrich
Hydrogen peroxide solution, SAJ first grade, ≥30.0%
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%, poly-coated bottles
Supelco
Hydrogen peroxide solution, 30 % (w/w), for ultratrace analysis
Supelco
Dehydrated Alcohol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (w/v) ammonium formate, 5 % (v/v) water, 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Methanol, NMR reference standard
Supelco
Methanol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (v/v) trifluoroacetic acid
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Supelco
Ethanol solution, certified reference material, 2000 μg/mL in methanol
Sigma-Aldrich
Ethanol Fixative 80% v/v, suitable for fixing solution (blood films)
Sigma-Aldrich
Hydrogen peroxide solution, 30 % (w/w) in H2O, contains stabilizer
Supelco
N,O-Bis(trimethylsilyl)trifluoroacetamide with trimethylchlorosilane, with 1% trimethylchlorosilane, for GC derivatization, LiChropur