Przejdź do zawartości
Merck

Przejdź do

22446

Supelpure HC Hydrocarbon Trap

volume 120 cc, 1/4 in. fitting

Zaloguj się, aby wyświetlić ceny organizacyjne i kontraktowe.

Wybierz wielkość

Zmień widok
Rozmiar/SKUDostępnośćCena netto
1 ea
Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności
780,00 zł

Informacje o tej pozycji

EC Number:
231-153-3
UNSPSC Code:
12352200
NACRES:
SB.54

780,00 zł


Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności

​
Złóż zamówienie na produkt na zamówienie
Pomoc techniczna
Potrzebujesz pomocy? Nasz zespół doświadczonych naukowców chętnie Ci pomoże.
Pozwól nam pomóc


technique(s)

gas chromatography (GC): suitable using :Suitable

volume

120 cc

fitting

1/4 in. fitting

General description

Activated charcoal adsorbs hydrocarbons and other contaminants from carrier gases, air, and hydrogen. Operates efficiently for approximately six months when total hydrocarbons in the incoming gas average 10 ppm.

Dimensions:
  • 120 cc Trap: 111/8in. (28.2 cm) long x 13/8 in. (35 mm) diameter
  • 750 cc Trap: 161/2 in. (41.9 cm) long x 25/16in. (59 mm) diameter
  • S-Trap: 71/2 in. (19 cm) long x 59/16 in. (14.1 cm) wide x 1/2 in. (13 mm) diameter [total bed length = 193/4 in. (50.2 cm); the extended bed length ensures prolonged contact between the gas and the adsorbent and provides greater working capacity]
Hydrocarbon traps are basically suitable in GC for carrier gas purification, as the name suggests they are primarily used for trapping hydrocarbons. Some hydrocarbon traps, like the Supelpure HC Hydrocarbon Trap, contain a carbon molecular sieve that also restricts the elution of moisture and oxygen. Surges of moisture and oxygen that enter the gas line during the installation of a new gas cylinder enter the Supelpure HC Hydrocarbon Trap and are released slowly, diluted by the clean carrier gas from the new cylinder. It particularly removes C3 and other higher hydrocarbons.

Legal Information

Ta strona może zawierać tekst przetłumaczony maszynowo.

Porównaj podobne pozycje

Wyświetl pełne porównanie

Pokaż różnice

1 of 1

Ta pozycja
245192451824449
description

volume 120 cc, 1/4 in. fitting

description

volume 750 cc, 1/2 in. fitting

description

volume 750 cc, 1/4 in. fitting

description

volume 120 cc, 1/4 in. fitting

volume

120 cc

volume

750 cc

volume

750 cc

volume

120 cc

technique(s)

gas chromatography (GC): suitable using :Suitable

technique(s)

gas chromatography (GC): suitable using :Suitable

technique(s)

gas chromatography (GC): suitable using :Suitable

technique(s)

gas chromatography (GC): suitable using :Suitable

fitting

1/4 in. fitting

fitting

1/2 in. fitting

fitting

1/4 in. fitting

fitting

1/4 in. fitting


Still not finding the right product?

Explore all of our products under Supelpure HC Hydrocarbon Trap


Klasa składowania

11 - Combustible Solids

Co się dzieje?

nwg

Temperatura zapłonu (°F)

Not applicable

Temperatura zapłonu (°C)

Not applicable



Wybierz jedną z najnowszych wersji:

Certyfikaty analizy (CoA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Dokumenty section.

Proszę o kontakt, jeśli potrzebna jest pomoc Obsługa Klienta

Masz już ten produkt?

Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.

Odwiedź Bibliotekę dokumentów



Questions

1–2 of 2 Questions  
  1. How do I refill the Supelpure HC Hydrocarbon Trap, Product No. 22446?

    1 answer
    1. Refilling: 1.Using two wrenches, remove the hex nuts from the fittings at each end of the trap. 2.Locate the end of the trap that has the two-piece fitting, and remove the 1/8 in NPT fitting. 3. Empty the contents of the trap into a convenient container. If possibly toxic organics are trapped on this material, ensure that appropriate disposal procedures are followed. 4. Clean any remaining Teflon sealing material from both internal and external threads of thefitting. The Supelco "Hook Septa Puller" Cat# 20352, is useful for this step. 5. Using Teflon sealing tape, wind a minimum of 3 to 5 full turns of tape around the male endof the NPT fitting while applying light tension to the tape. Always wrap in a clockwise direction when applying the sealing tape. Ensure that the tape does not obstruct the stainless steel flit installed in the end of the fitting. Using a funnel, replace the exhausted material with freshcharcoal Cat#22451. 6. Retighten the fitting. 7. Reinstall the trap in its previous position.

      Helpful?

  2. What is the Department of Transportation shipping information for this product?

    1 answer
    1. Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.

      Helpful?

Reviews

No rating value

Active Filters