SLMP025SS
Millex™-MP Filter Unit (Sterile)
pore size 0.22 μm, diam. 25 mm, polyethersulfone membrane, hydrophilic, medical device
Synonim(y):
Millex-MP 0.22µm Filter Unit, disposable syringe filter, polyethersulfone syringe filter, sterile syringe filter, syringe filter
Wybierz wielkość
| Do Państwa/SKU | Dostępność | Cena netto |
|---|---|---|
50 pkg | Dostępne do wysyłki DZISIAJzKuehne + Nagel Sp. z o.o. | 1020,00 zł |
Informacje o tej pozycji
1020,00 zł
Dostępne do wysyłki DZISIAJSzczegóły
Quality Segment
material
PVC housing, polyethersulfone membrane
sterility
sterile; ethylene oxide treated
product line
Millex™
feature
CE compliant, holdup volume< 0.1 mL after air purge, hydrophilic, FDA registered, medical device
manufacturer/tradename
Millex™
parameter
≥175 mL/min flow rate at 30 psi, 45 °C max. temp., 5.2 bar max. inlet pressure (75 psi)
diam.
25 mm
filtration area
4 cm2
housing diam.
29 mm
inlet to outlet H
25 mm
volume
100 mL
pore size
0.22 μm pore size
fitting
female Luer-Lok® inlet, male Luer outlet slip
shipped in
ambient
General description
Application
- Clinical benefits: Removal of microorganisms, particles, precipitates, and undissolved powders larger than the membrane’s rated pore size from solutions for clinical use.
- Hospital pharmacy: Sterile filtration and/or clarification of small volumes of protein pharmaceuticals, diagnostic imaging agents, chemotherapeutics, aqueous solutions, or water during admixture preparation.
- Direct patient care: Sterilization and/or particulate removal from epidural and other liquid anaesthetics as well as from irrigation solutions used in ophthalmic, otic, and other surgical procedures.
Features and Benefits
- Single use only, non-pyrogenic and non- toxic
- Polyethersulfone(PES) membrane filter sealed in a polyvinyl chloride(PVC) housing
- Compatible with most aqueous solutions
- CE marked and FDA registered
Other Notes
Legal Information
1 of 1
Ta pozycja | |||
|---|---|---|---|
| description pore size 0.22 μm, diam. 25 mm, polyethersulfone membrane, hydrophilic, medical device | description pore size 0.22 μm, diam. 25 mm, polyethersulfone membrane, hydrophilic, male Luer-Lok® outlet, medical device | description pore size 0.45 μm, diam. 33 mm, polyethersulfone membrane, hydrophilic, medical device | description pore size 0.22 μm, diam. 33 mm, polyethersulfone membrane, hydrophilic, medical device |
| manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ |
| pore size 0.22 μm pore size | pore size 0.22 μm pore size | pore size 0.45 μm pore size | pore size 0.22 μm pore size |
| diam. 25 mm | diam. 25 mm | diam. 33 mm | diam. 33 mm |
| material PVC housing, polyethersulfone membrane | material PVC housing, polyethersulfone membrane | material modified acrylic housing, polyethersulfone membrane | material modified acrylic housing, polyethersulfone membrane |
| fitting female Luer-Lok® inlet, male Luer outlet slip | fitting female Luer-Lok® inlet, male Luer-Lok® outlet | fitting female Luer-Lok® inlet, male Luer outlet slip | fitting female Luer-Lok® inlet, male Luer outlet slip |
| sterility sterile; ethylene oxide treated | sterility sterile; ethylene oxide treated | sterility sterile; γ-irradiated | sterility sterile; γ-irradiated |
Still not finding the right product?
Explore all of our products under Millex™-MP Filter Unit (Sterile)
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.