When used as a vent filter for air filtration, the product may be sterilized by autoclaving for re-use. If the filters are used in liquid filtration, autoclaving and re-use is not recommended. Please see the link below to review additional information in the product user guide:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/145/471/pf04597wrev0724-ms.pdf
SLFG050
Millex™ hydrophobic PTFE vent filter
pore size 0.2 μm, diam. 50 mm, non-sterile, 1/4-1/2 in. hose barb, sterilization compatible with autoclavable
Synonim(y):
0.2 μm PTFE syringe filter, Fluoropore® PTFE syringe filter, Millex-FG vent filter, Millex-FG50, Millex™-FG Vacuum Line Protector, disposable syringe filter, syringe filter, vacuum line filter
Zaloguj się, aby wyświetlić ceny organizacyjne i kontraktowe.
Wybierz wielkość
Zmień widok
| Do Państwa/SKU | Dostępność | Cena netto |
|---|---|---|
10 pkg | Przewidywany termin wysyłki28 maja 2026zKuehne + Nagel Sp. z o.o. | 796,00 zł |
100 pkg | Dostępne do wysyłki DZISIAJzKuehne + Nagel Sp. z o.o. | 5090,00 zł |
Informacje o tej pozycji
UNSPSC Code:
41104922
NACRES:
NB.22
eCl@ss:
32031690
Pore size:
0.2 μm
Diam.:
50 mm
Sterility:
non-sterile
Material:
PTFE membrane, polypropylene housing
796,00 zł
Przewidywany termin wysyłki28 maja 2026Szczegóły
Pomoc techniczna
Potrzebujesz pomocy? Nasz zespół doświadczonych naukowców chętnie Ci pomoże.
Pozwól nam pomócQuality Segment
material
PTFE membrane, polypropylene housing
sterility
non-sterile
sterilization compatibility
autoclavable compatible
product line
Millex™
feature
hydrophobic
manufacturer/tradename
Millex™
parameter
≥15 L/min air flow rate at 5 psi, 130 °C max. temp., 23 L/min air flow rate at 5 psi (typical), 4.13 bar max. inlet pressure (60 psi)
technique(s)
analytical sample preparation: suitable, gas filtration: suitable, vent filtration: suitable
diam.
50 mm
filtration area
19.6 cm2
housing diam.
62 mm
inlet to outlet H
71 mm
impurities
≤20 EU/device bacterial endotoxins (LAL test, Aqueous extraction)
matrix
Fluoropore®
pore size
0.2 μm
input
gas
sample type organic solution(s)
bubble point
≥17 psig, 60/40% IPA/water
fitting
inlet stepped hose barb (with Female Luer slip interior), outlet stepped hose barb (with Female Luer slip interior)
shipped in
ambient
storage temp.
no temp limit
General description
Millex™ syringe filter units with hydrophobic Fluoropore® membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore® membrane can also be used for sterilizing or clarifying organic solutions. The 50 mm Millex filter units are especially useful for vacuum line protection. All units are bi-directional.
Application
- Sterilizing Gases
- Vacuum Line Protection
- Venting Sterile Containers
- Sterilizing and Clarifying Organic Solutions
Features and Benefits
- Ideal for vacuum line protection
- Autoclavable up to 10 times
- Bi-directional in flow
- Broad chemical compatibility
Legal Information
Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a trademark of Merck KGaA, Darmstadt, Germany
Ta strona może zawierać tekst przetłumaczony maszynowo.
1 of 1
Ta pozycja | |||
|---|---|---|---|
| diam. 50 mm | diam. 50 mm | diam. 50 mm | diam. 50 mm |
| pore size 0.2 μm | pore size 0.2 μm | pore size 0.2 μm | pore size 0.2 μm |
| material PTFE membrane, polypropylene housing | material PTFE membrane, polypropylene housing | material PTFE membrane, polypropylene housing | material PTFE membrane, polypropylene housing |
| manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ |
| fitting inlet stepped hose barb (with Female Luer slip interior), outlet stepped hose barb (with Female Luer slip interior) | fitting inlet/outlet hose barb (1/2 in.-1/4 in., with Female Luer slip interior) | fitting inlet stepped hose barb (with Female Luer slip interior), 1/8 in. male NPT outlet connection, 1/8 in. male NPT outlet fitting | fitting inlet stepped hose barb (1/2-1/4 in. silicone with Female Luer slip interior), 1/8 in. male NPT outlet |
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
Still not finding the right product?
Explore all of our products under Millex™ hydrophobic PTFE vent filter
— lub —
Wypróbuj nasze narzędzie Narzędzie selektora produktów, aby zawęzić opcje.
Certyfikaty analizy (CoA)
Poszukaj Certyfikaty analizy (CoA), wpisując numer partii/serii produktów. Numery serii i partii można znaleźć na etykiecie produktu po słowach „seria” lub „partia”.
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
-
Are these filters autoclavable for re-use?
1 answer-
Helpful?
-
-
What would be your recommendation to protect my instrumentation from water intrusion?
1 answer-
The recommended catalog number is SLFG05010 for the Millex-FG filter, which has a pore size of 0.20 µm and is made of hydrophobic PTFE material. The filter has a diameter of 50 mm.
Helpful?
-
-
Is there a sterile version of this filter available? Andrea
1 answer-
A sterile version of Product SLFG050 is not available.
Helpful?
-