D00202V01

Clarigard^® Cartridge Filter

pore size 0.2 μm, cartridge nominal length 20 in. (50 cm), filter diam. 2.75 in. (7 cm), Code 0

• UNSPSC Code: 23151806

Właściwości

• material: polypropylene filter
• feature: hydrophilic
• manufacturer/tradename: Clarigard^®
• parameter: 4.8 bar max. differential pressure (70 psid) at 25 °C, 4.8 bar max. inlet pressure (70 psi) at 25 °C
• cartridge nominal length: 20 in. (50 cm)
• filter diam.: 2.75 in. (7 cm)
• impurities: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• pore size: 0.2 μm pore size
• cartridge code: Code 0

Opis

General description

Cartridge Type: Liquid

Clarigard^® filters′ 99.99% retention rating characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard^® filter media provides maximum filtration capacity, and the all-polypropylene construction offers low extractables levels and broad chemical compatibility.

Device Configuration: Cartridge

Preparation Note

Sterilization Method:
10 autoclave cycles or SIP at 126°C for 30min

Analysis Note

Gravimetric Extractables: ≤ 20mg after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6L

Other Notes

Directions for Use:

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioburden reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

Legal Information

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

Ta strona może zawierać tekst przetłumaczony maszynowo.