CGW372S48

Polysep^™ II 1.0/0.2 µm nominal, Cartridge

cartridge nominal length 20 in. (50 cm), filter diam. 2.8 in.

• Kod UNSPSC: 23151806

Właściwości

• Materiały: borosilicate glass fiber (BGF) membrane; mixed cellulose esters (MCE) membrane; polypropylene device; polypropylene support (spun bonded); silicone seal
• Poziom jakości: 400
• zgodność regionalna: meets FDA 21 CFR 177–182 (all component materials)
• sterylność: non-sterile
• Kompatybilność ze sterylizacją: autoclavable compatible; steam-in-place compatible
• linia produktu: Polysep^™
• Właściwości: hydrophilic
• producent / nazwa handlowa: Polysep^™ II
• Parametry: 3.5 bar max. differential pressure (50 psid) at 25 °C
• metody: prefiltration: suitable
• Długość: 20 in.
• Szerokość: 2.7 in.
• długość nominalna kartridża: 20 in. (50 cm)
• device size: 20 in.
• śr. filtra: 2.8 in.
• filter filtration area: 0.92 m²
• zanieczyszczenia: ≤0.5 EU/mL bacterial endotoxins (LAL test, aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• macierz: Polysep^™ II
• pore size: 1.0/0.2 μm nominal pore size; 1.0/0.2 μm pore size
• kod wkładu: Code 7

Opis

Opis ogólny

Device Configuration: Cartridge
Cartridge Type: Liquid
Filter Grade: Prefilter

Zastosowanie

mAb & r-protein intermediates; Plasma; Vaccines & viral vectors; SVPs LVPs; Cell Culture; Media Filtration; Colloid Removal; Lipid Removal

Cechy i korzyści

Format: Double Layer

Opakowanie

Double Easy-Open bag

Uwaga dotycząca przygotowania

Sanitization: 30 min with hot water at 80 °C

Sterilization Method: 10 autoclave cycles or SIP at 121 °C for 30 min

This product was manufactured with a Millipore^® media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Komentarz do analizy

After autoclaving and a 24 hour soak in ASTM^® Type 1 reagent grade water at controlled room temperature, extractables level was ≤140 mg per 10-inch element after a 5000 mL flush.

Cartridges meet the requirements of the USP Oxidizable Substances Test after a water flush of 5000 mL per 10 inch Element

Inne uwagi

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer first page of Visual Inspection Guide and introduction section of Mixed cellulose esters Tech Brief
• Storage Statement: Please refer Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

The product is manufuactured in a facility with a Quality Management System approved by an accredited registering body to an ISO 9001 Quality Systems Standard.

Informacje prawne

ASTM is a registered trademark of American Society for Testing and Materials

Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany

Polysep is a trademark of Sigma-Aldrich Co. LLC

Informacja o środkach bezpieczeństwa

• Piktogramy: GHS02
• Hasło ostrzegawcze: Danger
• Zwroty wskazujące rodzaj zagrożenia: H228
• Zwroty wskazujące środki ostrożności: P210 - P240 - P241 - P280 - P370 + P378
• Klasyfikacja zagrożeń: Flam. Sol. 1
• Kod klasy składowania: 4.1B - Flammable solid hazardous materials
• Klasa zagrożenia wodnego (WGK): WGK 2