AIRGAP001

Air Gap Device

For use with Direct-Q^® and Milli-Q^® IX Systems

• UNSPSC Code: 41104200
• NACRES: NA.21
• eCl@ss: 33050190

Właściwości

• feature: 8 mm OD Tubing
• packaging: pkg of 1 unit
• parameter: 150 L/hr max. flow rate
• L × W: 11.5 cm × 1.5 cm
• fitting: connector fitting for 8 mm O.D. tubing
• compatibility: for use with Direct-Q^® UV, for use with Direct-Q^®, for use with Milli-Q^® IX 7003, for use with Milli-Q^® IX 7005, for use with Milli-Q^® IX 7010, for use with Milli-Q^® IX 7015
• shipped in: ambient

Opis

General description

Water purification systems and storage tanks sometimes require a connection to the drain. Drains are typically dirty environments. Therefore, when the outlet of the water system reject tubing is pushed into the drain, there is a risk of contamination inside the reject tubing, and then progressively upward to the water system. One way to prevent this from occurring is to install an Air Gap Device on the reject tubing. Air Gap Device is a water purification accessory used for the protection of reject lines. Designed to be directly connected to 8 mm OD tubing, it is delivered with connections for wall fixation. This allows the reject water flow to move through the tubing without touching the inside of the drain. Installing an air gap device is an easy and safe way to prevent contamination above the air gap level. Made of plastic, the air gap device is placed on the tubing going from the water system to the drain. This creates an unobstructed vertical space, the “air gap”, which will prevent backflow from the drain into the system.

Features and Benefits

Provides cost-effective protection of the water system and its accessories.

Legal Information

DIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany

Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany

Ta strona może zawierać tekst przetłumaczony maszynowo.