1.50414

Purospher^® STAR RP-18 endcapped (3 µm) HPLC Columns

L × I.D. 150 mm x 3 mm Hibar^® RT HPLC Column

• Synonim(y): Purospher^® STAR RP-18 endcapped (3µm) Hibar^® RT 150-3
• Kod UNSPSC: 41115709
• NACRES: SB.52

Właściwości

• product name: Purospher^® STAR RP-18 endcapped (3 µm), L × I.D. 150 mm x 3 mm Hibar^® RT HPLC column
• Materiały: stainless steel column
• Poziom jakości: 100
• agency: suitable for USP L1
• linia produktu: Purospher^®
• Właściwości: endcapped
• opakowanie: 1 ea of
• zakres etykietowania: 17% Carbon loading
• Parametry: 400 bar pressure; 65 °C max. temp.
• metody: HPLC: suitable; LC/MS: suitable; mass spectrometry (MS): suitable (High)
• kolumna dł. × śr. wewn.: 15 cm × 3 mm
• powierzchnia: 330 m²/g
• macierz: fully porous particle
• grupa aktywna macierzy: C18 bonding phase
• wielkość cząstki: 3 μm
• wielkość porów: 120 Å pore size
• operating pH range: 1.5-10.5
• metoda separacji: reversed phase; supercritical fluid (SFC)
• temp. przechowywania: no temp limit

Opis

Opis ogólny

Purospher^® STAR RP-18 endcapped, 3 µm HPLC columns are designed for universal use and allow the separation of basic, neutral, and metal chelating compounds with simple mobile phases and excellent peak symmetry. They are based on ultra-pure fully porous silica particles (Type B). These columns offer an outstanding stability from pH 1.5 to 10.5 over a wide temperature range, and suitability for up to 100% aqueous mobile phases. Plus, they demonstrate best all-round retention characteristics, as proven by the Tanaka test. Thanks to these features, Purospher^® STAR RP-18 endcapped, 3 µm HPLC columns allow maximum flexibility to use the best chromatographic conditions for any separation including reversed phase.Purospher^® STAR RP-18 endcapped, 3 µm Hibar^® RT 150-3 is a ready to use stainless steel column suitable for connection to any HPLC system.The column dimension of 150 mm length x 3 mm I.D. is the optimal choice for high resolution HPLC separation of complex samples at lower flow rate, allowing significant solvent savings and improved sensitivity. A 3 mm I.D. column enables a more sustainable separations in comparison to 4 or 4.6 mm I.D. column due to the use of less solvent for the chromatographic separation.The recommended guard column is Purospher^® STAR RP-18 endcapped (5 µm) LiChroCART^® 4-4 part number 1.50250.0001]. For direct connection to a Hibar^® RT columns the Precolumn holder for 4-4 LiChroCART^® cartridges, part number 1.51487.0001 can be used.Learn more about Purospher^® STAR HPLC and UHPLC ColumnsLearn more about the Supelco HPLC Column portfolio and Method development:Brochure: HPLC and UHPLC Column Selection GuideBrochure: A Practical Guide to HPLC - Method Development Guide

Zastosowanie

Intended to be used in the separation of aflatoxins, aldehydes, alkaloids, antibiotics, catecholamines, explosives, oligonucleotides, esters, fat soluble vitamins, lipids, fatty acids, flavonoids, ketones, nitrosamines, nucleosides, PAHs, PCBs, peptides, pesticides, phenols, phthalates, preservatives, steroids, metabolized steroids, sulfonamides, sweeteners, and water soluble vitamins.

Cechy i korzyści

• Ultra-pure silica (99.999%) for excellent peak symmetry
• High separation efficiency
• Reproducible results from run-to-run and batch-to-batch
• Best all-round performance according to Tanaka
• Outstanding pH stability from pH 1.5 to 10.5
• No phase collapse when using highly aqueous mobile phases
• Good suitability for LC-MS applications

Komentarz do analizy

Pressure: ≤ 150 bar
Theoretical Plates (N/m) (Anthracene): ≥ 120000
Symmetry (Anthracene): 0.8 - 1.4
Capacity factor (Anthracene): 4.5 - 6.5

Informacje prawne

Hibar is a registered trademark of Merck KGaA, Darmstadt, Germany

LICHROCART is a registered trademark of Merck KGaA, Darmstadt, Germany

Purospher is a registered trademark of Merck KGaA, Darmstadt, Germany

This page may contain text that has been machine translated.