Each tablet should be reconstituted in 1 liter of distilled water. 4 tablets can be used to prepared 4 liters of buffer. 4 liters is the equivalent of 3.8 gallons.
Wybierz wielkość
| Rozmiar/SKU | Dostępność | Cena netto |
|---|
Informacje o tej pozycji
Quality Segment
form
tablet
IVD
for in vitro diagnostic use
pH
6.8 (20 °C in H2O)
application(s)
clinical testing
diagnostic assay manufacturing
hematology
histology
storage temp.
15-25°C
General description
100 tablets are sufficient for 100L buffer solution, each produced solution can be stable up to 4 weeks. Buffer tablets according to Weise are IVD products and CE registered. For more details, please see instructions for use (IFU). The IFU can be downloaded from this webpage.
Analysis Note
Crushing strength: ≥ 50 N
Disintegration time: ≤ 20 min
Suitability for blood-smear staining: conforms
Klasa składowania
13 - Non Combustible Solids
wgk
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
-
How much water to add to one tablet to make approximately 1 gallon of buffer solution?
1 answer-
Helpful?
-
-
Is this item a direct replacement for Gurr's Buffer pH 6.8 from other suppliers? Both products are phosphate-based with a pH of 6.8, but there is limited information available on the formulation. Intended application is Wright Giemsa staining for cytogenetics analysis.
1 answer-
The Gurr, Weise, and Sorensen's phosphate buffers are generally considered interchangeable for use in hematology; however, without knowing specific formulation information we cannot definitively say this product is a direct replacement.
Helpful?
-