SLGPX13NL

Filtro de jeringa de polietersulfona Millex^™

pore size 0.22 μm, diam. 13 mm, non-sterile, hydrophilic

• Sinónimos: Filtro de jeringa Millex-GP, Filtro de jeringa de PES de 0,22 μm., Jeringa de jeringa PES Millipore Express^®, filtro de jeringa de polietersulfona
• Código UNSPSC: 41104922
• eCl@ss: 32031690
• NACRES: NB.24

Propiedades

• Materiales: polyethersulfone membrane; polypropylene housing
• Nivel de calidad: 400
• Agency: suitable for DIN 38407-42; suitable for GB 31604.35-2016
• esterilidad: non-sterile
• Línea del producto: Millex^™
• Características: holdup volume≤ 15 μL (after air purge); hydrophilic
• fabricante / nombre comercial: Millex^™
• Parámetros: 10 bar max. inlet pressure (150 psi); 45 °C max. temp.; 48 L/min flow rate; 48 mL/min-cm² water flow rate
• técnicas: UHPLC: suitable; analytical sample preparation: suitable; fast flow filtration: suitable; low protein-binding filtration: suitable
• Altura: 21 mm
• Diámetro: 13 mm
• filtración área: 0.8 cm²
• volumen: 10 mL
• color: green
• tamaño de poro: 0.22 μm
• entrada: sample type aqueous solution(s); sample type mild organic solution(s)
• punto de burbuja: ≥4.1 bar, air with water at 23 °C
• Adaptador: female Luer-Lok^® inlet; male Luer outlet slip
• Condiciones de envío: ambient

Descripción

Descripción general

Non-sterile Millex^™ syringe filters with Millipore Express^® PLUS polyethersulfone (PES) membrane provide fast filtration of aqueous and mild organic solutions.

• Low protein binding to minimize interaction with your sample and maximize recovery
• Polypropylene housing, offering a low level of extractables and broad chemical compatibility

Información legal

Luer-Lok is a registered trademark of Becton-Dickinson & Co.

MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany

Millex is a trademark of Merck KGaA, Darmstadt, Germany