Saltar al contenido
Merck

654892

Sigma-Aldrich

Aldrich® Negative Photoresist Kit I

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

UNSPSC Code:
12352300
NACRES:
NA.23

storage temp.

2-8°C

General description

Aldrich® Negative Photoresist Kit I consists of materials for photolithography. The photoresist can be spin coated on the glass substrate for the formation of electrode arrays. The kit also provides masking and patterning on the glass surface.

Application

Aldrich® Negative Photoresist Kit I has been used in the fabrication of microelectrodes by photolithography. It can also be used to fabricate the droplet-based microfluidic device, microfluidic chips, glass optical waveguides, and integrated grating couplers.

Legal Information

Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

Los componentes del kit también están disponibles por separado

Referencia del producto
Descripción
SDS

  • 651761Negative resist remover I 250 mLSDS

  • 651788Negative resist developer I 250 mLSDS

  • 651796Negative photoresist I 100 mLSDS

  • 651974Negative resist thinner I 100 mLSDS

signalword

Danger

Hazard Classifications

Acute Tox. 4 Dermal - Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Aquatic Chronic 2 - Asp. Tox. 1 - Carc. 2 - Eye Dam. 1 - Repr. 1B - Skin Corr. 1 - STOT RE 2 Inhalation - STOT SE 3

target_organs

Central nervous system,Liver,Kidney, Respiratory system

Storage Class

6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects

flash_point_f

Not applicable

flash_point_c

Not applicable


Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

High-speed droplet actuation on single-plate electrode arrays
Banerjee AN, et al.
Journal of Colloid and Interface Science, 362(2), 567-574 (2011)
Fabrication and characterization of optical waveguides and grating couplers
J P Sharpe, et al.
European Journal of Physics, 34, 1317-1317 (2013)
Arghya Narayan Banerjee et al.
Journal of colloid and interface science, 362(2), 567-574 (2011-08-02)
This paper reports a droplet-based microfluidic device composed of patterned co-planar electrodes in an all-in-a-single-plate arrangement and coated with dielectric layers for electrowetting-on-dielectric (EWOD) actuation of discrete droplets. The co-planar arrangement is preferred over conventional two-plate electrowetting devices because it
A compact 3D-printed interface for coupling open digital microchips with Venturi easy ambient sonic-spray ionization mass spectrometry
Hu J, et al.
Analyst, 140(5), 1495-1501 (2015)
Jie-Bi Hu et al.
The Analyst, 140(5), 1495-1501 (2015-01-28)
Digital microfluidics (DMF) based on the electrowetting-on-dielectric phenomenon is a convenient way of handling microlitre-volume aliquots of solutions prior to analysis. Although it was shown to be compatible with on-line mass spectrometric detection, due to numerous technical obstacles, the implementation

Protocolos

Photoresist kit offers pre-weighed chemical components for lithographic processes, with separate etchants for various substrate choices.

Photoresist kit offers pre-weighed chemical components for lithographic processes, with separate etchants for various substrate choices.

Photoresist kit offers pre-weighed chemical components for lithographic processes, with separate etchants for various substrate choices.

Photoresist kit offers pre-weighed chemical components for lithographic processes, with separate etchants for various substrate choices.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico