DVPP01300

Membrana de filtración de PVDF, tamaño de poro 0,65 μm

Durapore^®, filter diam. 13 mm, hydrophilic

• Sinónimos: Durapore^® Hydrophilic PVDF Membrane
• Código UNSPSC: 40161507
• eCl@ss: 32031602
• NACRES: NB.24

Propiedades

• Materiales: PVDF membrane; plain filter; white filter
• Nivel de calidad: 400
• esterilidad: non-sterile
• Características: hydrophilic
• fabricante / nombre comercial: Durapore^®; Millipore
• sustainability: Greener Alternative Product
• Parámetros: >6 mL/min-cm² water flow rate; 85 °C max. temp.; 9 L/min-cm² air flow rate
• Diámetro: 13 mm
• diám. del filtro: 13 mm
• grosor: 125 μm
• extraíbles gravimétricos: 0.5%
• índice de refracción: n/D 1.42
• Matriz: Durapore^®
• tamaño de poro: 0.65 μm pore size; 70 % porosity
• capacidad: 4 μg/cm² binding capacity (protein)
• punto de burbuja: ≥1.10 bar, air with water at 23 °C
• categoría alternativa más sostenible: Re-engineered
• Condiciones de envío: ambient

Descripción

Descripción general

Durapore^® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.

Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery

Filter Code: DVPP

Filter Type: Screen filter

We are committed to bringing you Greener Alternative Products, which have been re-engineered to enable more sustainable research solutions. The inner & outer boxes containing the membrane discs are made from bio-circular material allocated using the ISCC mass balance approach. Click here for more information.

Aplicación

Clarifying filtration of biological solutions

Otras notas

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: General laboratory filtration
• Intended Use: Retention or removal of biological contaminants
• Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 μm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Información legal

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany