CN2571S06

Cartucho de filtración Polygard^® CN

pore size 30.0 μm, cartridge nominal length 10 in. (25 cm), Code 7 (2-226; O-rings w/locking-tabs)

• Sinónimos: Polygard-CN Cartridge Filter 10 in. 2.5 μm Code 7 Silicone
• UNSPSC Code: 23151806
• eCl@ss: 32031690

Propiedades

• material: polypropylene ; silicone seal
• Quality Level: 400
• feature: hydrophilic
• manufacturer/tradename: Polygard
• parameter: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• cartridge nominal length: 10 in. (25 cm)
• diam.: 7.0 cm (2.75 in.)
• filtration area: 0.42 m²
• impurities: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• gravimetric extractables: ≤50 mg
• pore size: 30.0 μm nominal pore size; 30.0 μm pore size
• input: sample type liquid
• cartridge code: Code 7 (2-226; O-rings w/locking-tabs)

Descripción

General description

Device Configuration: Cartridge

Preparation Note

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

Analysis Note

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L

Other Notes

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany