Saltar al contenido
Merck
Todas las fotos(1)

Key Documents

907669

Sigma-Aldrich

Silver ink

75 wt%, LIFT printable

Sinónimos:

Ag ink, Laser induced forward transfer

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Fórmula lineal:
Ag
UNSPSC Code:
12352103
NACRES:
NA.23

description

Silver content : 75 wt%
Solvent : Diethylene Glycol Mono Butyl Ether (DGBE)
Surface Tension : 28 dyn/cm (Pendant Drop)

form

paste

particle size

50-70 nm (by Lumisizer™)
90-120 nm (by Lumisizer™)

viscosity

50,000-100,000 cP (Shear Rate: 1 s-1
250cP - 450 cP (Shear Rate: 1000 s-1))

density

2.85-3.3

storage temp.

15-25°C

Categorías relacionadas

Application

This Ag ink product is a conductive high viscous ink based on single-crystal silver nanoparticles in an organic solvent, has been designed for LIFT (Laser Induced Forward Transfer) digital printing and laser sintering.

The ink offers:
  • Uniform and reproducible donor layer with low drying speed
  • Stable accurate jetting in different types of laser systems, wide working window of jetting parameters
  • High speed printing (20-50kHz), allowing high throughput
  • Narrow patterning on plastic and glass substrates (line width ∼50 μm, height ∼0.5 μm, spacing ∼50 μm)
  • Laser sintering of LIFT printed pattern, providing good electrical properties


Fit for:
LIFT digital printing
Additive electronic manufacturing
Printed electronics: RFID, FPD, Sensors

Laser induced forward transfer printing (LIFT) is a non-contact, nozzle-free, one step, direct laser writing process.
LIFT can operate under atmospheric conditions, is compatible with low laser fluences, allows the printing of organic and inorganic materials as well as biological elements. The printing process can take place from both liquid and solid phases. It further has a high lateral resolution only defined by the laser spot size. It is a method compatible with inorganic semiconductor sensor fabrication, OLED fabrication and bio printing.

Other Notes

Resistivity (4PP): After laser sintering* ≤ 8 μΩ·cm (≤ 5 bulk) for LIFT printed line (∼1-2 μm thick) on plastic substrate
*Parameters should be optimized depending on line geometry and substrate

Storage and Stability

Keep container tightly closed. Store at room temperature, do not heat above 60 °C and do not freeze.

Legal Information

Lumisizer is a trademark of LUM GmbH

pictograms

Exclamation markEnvironment
GHS07,GHS09

signalword

Warning

hcodes

H319,H410

Hazard Classifications

Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2

Storage Class

10 - Combustible liquids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 1

1 of 1

Silver, dispersion nanoparticle, 30-35 wt. % in triethylene glycol monoethyl ether, spec. resistivity 11 μΩ-cm, for printing on plastic films

Sigma-Aldrich

736465

Silver, dispersion

V S Cheptsov et al.
Letters in applied microbiology, 67(6), 544-549 (2018-09-18)
Recently, it was shown that laser-induced forward transfer (LIFT) technology and the laser engineering of microbial systems (LEMS) technique (based on LIFT method) are effective for isolation of micro-organisms from different complex substrates. These techniques frequently utilize Au as an
Laser-induced forward transfer from healing silver paste films printing
Turkoz E, et al.
Applied Physics Letters, 113(22), 221601/1-221601/5 (2018)
Printing of complex free-standing microstructures via laser-induced forward transfer (LIFT) of pure metal thin films
Feinaeugle M, et al.
Additive Manufacturing, 24, 391-399 (2018)

Artículos

High Crystalline Organic Transistors

Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.

High Crystalline Organic Transistors

Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.

High Crystalline Organic Transistors

Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.

High Crystalline Organic Transistors

Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.

Ver todo

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico