0.007 L/min-cm2-psi air flow rate 140 °C max. temp. 3.36 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi) ~16 mL/min-cm2 water flow rate at 10 psi (typical results)
filter diam.
37 mm
thickness
25 μm
gravimetric extractables
<1%
refractive index
n/D 1.6
matrix
Isopore™
pore size
0.22 μm pore size 13.8 % porosity
bubble point
≥5.2 bar, air with water at 23 °C
shipped in
ambient
General description
The Isopore™ membrane is a polycarbonate, track-etched screen filter useful in surface visualization. It is useful in the analysis of airborne contaminants using optical or electron microscopy. The precise pore diameter and a consistent pore size enable accurate size-base sample separation. Isopore™ membrane filters are applicable for use in chemotaxis assay, air, monitoring and epifluorescent microscopy.
Application
Chemotaxis
Bioassays
Cytology
Air monitoring
SEM analysis
Sterility testing
Microplastics analysis
Microplastics analysis grade water
Features and Benefits
Isopore™ membrane structure enables particles retention on the surface for easy counting and analysis.
Displays low background interference.
Non-hygroscopic.
reduced sample analysis time.
Translucent material.
Caution
Possible reduction in flow rates may occur after autoclaving.
Legal Information
ISOPORE is a trademark of Merck KGaA, Darmstadt, Germany
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
