20295

Purge/Trap G

for use with Tekmar^® Velocity XPT, LSC-1, LSC-2, LSC-2000, 4000 (Straight, 12 in./30.5 cm, Swagelok fitting), HT-3

• Synonym(s): PURGE TRAP G. Tekmar^®
• UNSPSC Code: 23151817

Properties

• application(s): environmental
• compatibility: for use with Tekmar^® Velocity XPT, LSC-1, LSC-2, LSC-2000, 4000 (Straight, 12 in./30.5 cm, Swagelok fitting), HT-3

Description

General description

Tubes used in purge and trap analyses generally are packed with multiple beds of adsorbent materials, so that a broad range of polar and nonpolar, high and low molecular weight compounds can be trapped in a single tube. Each bed protects the next, increasingly active bed, by preventing compounds from being held so strongly that they cannot be desorbed quickly without decomposition. During the purge phase of sampling, lower molecular weight compounds pass through the initial adsorbent beds, but are trapped by succeeding beds. During desorption, the carrier gas passes through the trap in the reverse direction of purge flow, so that higher molecular weight compounds never come in contact with the stronger (innermost) adsorbents.

Legal Information

Tekmar is a registered trademark of Tekmar Co.

Safety Information

• Pictograms: GHS08
• Signal Word: Danger
• Hazard Statements: H372
• Precautionary Statements: P260 - P264 - P270 - P314 - P501
• Hazard Classifications: STOT RE 1 Inhalation
• Target Organs: Lungs
• Storage Class Code: 6.1D - Non-combustible, acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects
• WGK: WGK 3
• Flash Point(F): Not applicable
• Flash Point(C): Not applicable