The empty bottle is tested to withstand at least 36 psi, but it is not tested once the bottle contains the product. It is not typical to pressure-transfer from one of these HDPE bottles. The product should be transferred into a secondary container from which it is suitable for pressure transfer.
901621
Buffered oxide etchant (BOE) 10:1
Synonym(s):
BHF, Buffered HF
Sign Into View Organizational & Contract Pricing
Select a Size
1 L
NOK 993.00
All Photos(1)
Select a Size
Change View
1 L
NOK 993.00
About This Item
UNSPSC Code:
12161700
NACRES:
NA.23
Recommended Products
form
liquid
Related Categories
General description
Buffered oxide etchant (BOE) is a wet etchant used in microfabrication. Its primary use is in etching thin films of silicon dioxide (SiO2) or silicon nitride (Si3N4). It is a mixture of a buffering agent, such as ammonium fluoride (NH4F), and hydrofluoric acid (HF). Concentrated HF etches silicon dioxide too quickly for good process control and also peels photoresist used in lithographic patterning.
Application
Buffered oxide etchant (BOE) 10:1 can be used in the etching of titanium carbide, which can be used in microelectromechanical systems (MEMS).[1] It can also be used in the etching of spin-on-dopant (SOD) for the development of conductor-insulator-conductor tunneling diodes.[2] It can also be used to enhance the surface of fused quartz devices.[3]
Signal Word
Danger
Hazard Statements
Precautionary Statements
Hazard Classifications
Acute Tox. 2 Dermal - Acute Tox. 3 Inhalation - Acute Tox. 3 Oral - Eye Dam. 1 - Skin Corr. 1B
Storage Class Code
6.1B - Non-combustible acute toxic Cat. 1 and 2 / very toxic hazardous materials
WGK
WGK 2
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Study on surface roughness improvement of Fused Quartz after thermal and chemical post-processing
2016 IEEE International Symposium on Inertial Sensors and Systems, 31(8), 101-104 (2016)
New process development for planar-type CIC tunneling diodes
Choi K, et al.
IEEE Electron Device Letters, 31(8), 809-811 (2010)
Integration of wear-resistant titanium carbide coatings into MEMS fabrication processes
Radhakrishnan G, et al.
Tribology Letters, 8(2-3), 133-137 (2000)
-
I’m considering using nitrogen pressure to dispense Buffered Oxide Etch from your containers. The pressure I plan to use is approximately 2 ATM (1 ATM above atmospheric pressure). Can you confirm if the bottles are rated to safely handle this pressure?
1 answer-
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service
