Reverse the orientation of the column. Flush for a few minutes with a 20% aqueous solution of the organic used in the analysis to remove buffer salts. Flush for about 30 mins with 100% of the organic used in the analysis. The column can be stored with this organic solution. Before reusing the column, flush again for a few minutes with 20% organic to prevent precipitation of buffer salts.
Z226262
Nucleosil® CN HPLC Column
5 μm particle size, L × I.D. 25 cm × 4.6 mm
Sinónimos:
Cyanopropyl HPLC Column
Seleccione un Tamaño
MXP 23,037.00
Disponible para envío el14 de abril de 2025Detalles
Seleccione un Tamaño
About This Item
MXP 23,037.00
Disponible para envío el14 de abril de 2025Detalles
Productos recomendados
Agency
suitable for USP L10
Línea del producto
Nucleosil®
Características
endcapped: no
fabricante / nombre comercial
Nucleosil®
Extensión del etiquetado
5% Carbon loading
Parámetros
400 bar pressure (5801 psi)
técnicas
HPLC: suitable
L × D.I.
25 cm × 4.6 mm
superficie
350 m2/g
Matriz
cyano
grupo activo de la matriz
cyano phase
tamaño de partícula
5 μm
tamaño de poro
100 Å
técnica de separación
hydrophilic interaction (HILIC)
normal phase
reversed phase
¿Está buscando productos similares? Visita Guía de comparación de productos
Categorías relacionadas
cartucho de precolumna
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.
Si necesita más asistencia, póngase en contacto con Atención al cliente
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
-
What is/are the storage solvent(s)? What should I store it in and clean it with for using in reverse-phase?
1 answer-
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico