503185

Carbon Dioxide Trap

volume 100 cc, 1/8 in. fitting

• Sinónimos: CO2 TRAP 100CC, 1/8IN FITTINGS
• EC Number: 215-185-5
• UNSPSC Code: 12000000

Propiedades

• volume: 100 cc
• fitting: 1/8 in. fitting

Descripción

General description

Sodium hydroxide nonfibrous silicate material is universally accepted for its high absorptive capacity and indicating properties for carbon dioxide. Typically, this material will absorb 20-30% of its weight in carbon dioxide before replacement of the saturated material is required. As carbon dioxide is absorbed, the greenish-brown material turns white because of the formation of sodium carbonate. The trap body is constructed of borosilicate glass, and the fittings are nickel-plated and have sintered stainless steel frits.

A moisture trap should be installed downstream from this unit to absorb the moisture that is produced.

Note: Exercise extreme caution when refilling the trap due to the caustic nature of the absorbent.

Dimensions:

• 100 cc Traps: 123/4 in. (32.4 cm) long x 13/4 in. (44 mm) diameter
• 250 cc Traps: 171/2 in. (44.4 cm) long x 2 in. (51 mm) diameter

Application

It may be used to connect combustion oven and GCMS separator, for transfer of the gas into MS inlet system which monitors isotope-ratio.

Información de seguridad

• pictograms: GHS05
• signalword: Danger
• hcodes: H290,H314
• pcodes: P234 - P260 - P280 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338
• Hazard Classifications: Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A
• Storage Class: 8B - Non-combustible corrosive hazardous materials
• wgk_germany: WGK 3
• flash_point_f: Not applicable
• flash_point_c: Not applicable
• ppe: Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges