Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

Ver Toda la documentación

30549

Sigma-Aldrich

Kollicoat® IR

Sinónimos:

Macrogol-poly(vinyl alcohol) graft-copolymer, Polyvinyl alcohol-polyethylene glycol graft-copolymer

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización

Seleccione un Tamaño

500 G
MXP 5,323.00

MXP 5,323.00

Check Cart for Availability
Solicitar un pedido a granel
Todas las fotos(1)

Seleccione un Tamaño

Cambiar Vistas
500 G
MXP 5,323.00

About This Item

Número de CAS:
96734-39-3
Código UNSPSC:
12162002
NACRES:
NA.25

MXP 5,323.00

Check Cart for Availability
Solicitar un pedido a granel

impurezas

ethylene glycol, complies (meets the requirements of Macrogol Polyvinylalcohol Grafted Copolymer Ph Eur Ed. 7)
≤1 ppm ethylene oxide
≤10 ppm dioxan
≤100 ppm vinyl acetate
≤15000 ppm acetic acid
≤20 ppm heavy metals

residuo de ign.

≤2%

pérdida

≤5% loss on drying

pH

5.0-8.0 (20% in H2O)

viscosidad

50-250 mPa.s, 20 %(23 °C, Brookfield RVT) (SP.2, 100RPM)

número de éster

10‑70 mg KOH/g

Aplicación

Kollicoat IR is used in the pharmaceutical industry as a binder, pellets, and particulate matter. This research grade product is intended for use in R&D and development only.

Información legal

Kollicoat is a registered trademark of BASF SE

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
BCCL2360
BCCK3276
BCCJ5782
BCCG4258
BCCF7577

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Kyung Jin Son et al.
ACS applied materials & interfaces, 3(2), 573-581 (2011-02-05)
In this study, we describe the use of organized mesoporous titanium oxide (TiO(2)) films as three-dimensional templates for protein microarrays with enhanced protein loading capacity and detection sensitivity. Multilayered mesoporous TiO(2) films with high porosity and good connectivity were synthesized
Susanne Muschert et al.
European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V, 72(1), 130-137 (2009-01-17)
The aim of this study was to better understand the underlying drug release mechanisms from aqueous ethylcellulose-coated pellets containing different types of drugs and starter cores. Theophylline, paracetamol, metoprolol succinate, diltiazem HCl and metoprolol tartrate were used as model drugs
Sandra Guns et al.
Pharmaceutical research, 28(3), 673-682 (2010-11-26)
To investigate the effect of the manufacturing method (spray-drying or hot-melt extrusion) on the kinetic miscibility of miconazole and the graft copolymer poly(ethyleneglycol-g-vinylalcohol). The effect of heat pre-treatment of solutions used for spray-drying and the use of spray-dried copolymer as
Pan Liu et al.
Journal of pharmaceutical sciences, 101(8), 2811-2820 (2012-05-23)
The objective of this study was to investigate the drug release mechanism and in vivo performance of Tanshinone IIA sustained-release pellets, coated with blends of polyvinyl acetate (PVAc) and poly(vinyl alcohol)-poly(ethylene glycol) (PVA-PEG) graft copolymer. A formulation screening study showed

Questions

1–2 of 2 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico