PCC300C15C

Pellicon^® Capsule with Ultracel^® Membrane

C Screen, 1.5 m² AseptiQuik^® G connectors

• Sinónimos: Pellicon^® Capsule with Ultracel^® Membrane
• Código UNSPSC: 23151806

Propiedades

• Materiales: EPDM rubber seal; PPO/PS blend (core); PPO/PS blend housing; TPE seal; composite regenerated cellulose (CRC) membrane; epoxy adhesive; polyester screen; polypropylene screen; polyurethane adhesive
• Nivel de calidad: 400
• esterilidad: sterile; γ-irradiated
• Línea del producto: Pellicon^®
• Características: holdup volume 456 mL (in feed channel); holdup volume 741 mL (in permeate channel)
• envase: package of 1
• Parámetros: max. inlet pressure at 75 psi (5.1 bar) and 4-30 °C; max. transmembrane pressure at 45 psi (3.1 bar) and 4-30 °C; 4-6 L/min-m² flow rate
• técnicas: ultrafiltration: suitable
• Diámetro: 10.3 cm (4.1 in.)
• filtración área: 1.5 m²
• pantalla tamaño: , Type C screen (coarse screen)
• tamaño: 43.7 cm (17.2 in.) , Length
• impurezas: ≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m²)
• Matriz: Ultracel^®
• tamaño de poro: 300 kDa
• intervalo de pH: 2-13
• temp. de almacenamiento: 15-25°C

Descripción

Descripción general

The Pellicon^® Capsule is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied sterilized by irradiation.

Feed: AseptiQuik^® G Connector

Permeate: AseptiQuik^® G Connector

Retentate: AseptiQuik^® G Connector
Permeate: AseptiQuik^® G Connector

Aplicación

Viral Gene Therapies, Vaccines, Concentration, Diafiltration, Buffer exchange, Protein purification, mRNA

Características y beneficios

• Plug ′n play, holderless design - easy to install, safe to remove
• Gamma Sterilized and preseravtive-free - ready to process in minutes
• True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
• Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
• Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

Envase

A foam clamshell is inserted over the end caps on both ends of the capsule which is then double-bagged and vacuum sealed. The double-bagged capsule is placed on a tray and then individually boxed.

Otras notas

The Emprove^® Program complements the product portfolio through

• Comprehensive documentation to support qualification, risk assessment and process optimization needs.
• Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
• Convenient 24/7 access to up-to-date product information.

Información legal

AseptiQuik is a registered trademark of Colder Products Company

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany