FMLW04700

PTFE Membrane Filter, 5.0 μm Pore Size

Fluoropore^®, filter diam. 47 mm, hydrophobic

• Sinónimos: Fluoropore Membrane Filter
• UNSPSC Code: 40161507
• NACRES: NB.24
• eCl@ss: 32031602
• Pore size: 5.0 μm pore size, ≥60 % porosity
• Material: PTFE membrane, gridded filter, white filter
• Feature: hydrophobic
• Diam.: 47 mm
• Sterility: non-sterile

Propiedades

• material: PTFE membrane, gridded filter, white filter
• sterility: non-sterile
• feature: hydrophobic
• manufacturer/tradename: Fluoropore^®, Millipore
• sustainability: Sustainability features
• parameter: 0.82 L/min-cm² air flow rate at 0.028 psi, 130 °C max. temp. (Curling may occur at elevated temperatures), 236 mL/min-cm² liquid flow rate (27.5 in Hg (100% IPA))
• diam.: 47 mm
• filter diam.: 47 mm
• thickness: 254 μm , Typical
• matrix: Fluoropore^®
• pore size: 5.0 μm pore size, ≥60 % porosity
• bubble point: ≥0.07 bar (0.97 psi), 100% IPA
• shipped in: ambient

Descripción

General description

Filter Code: FMLW

Unlike fibrous filter media that trap particles in their matrix, Fluoropore^® (hydrophobic PTFE) membranes collect particles on their surface, which make them ideal candidates for use in airborne particle monitoring applications. This surface collection provides better detection efficiencies and lower FWHM measurements. (FWHM is defined as the full width at half of the maximum height of the P0-218 peak obtained during sampling of room air.)

•High collection efficiency
•Extremely low pressure drop
•Higher throughput capacity
•Black backing ensures proper orientation

Choice of Pore Sizes:
Fluoropore membranes are available in 3 µm (FSLW) and 5 µm (FMLW) pore sizes - the smaller pore size provides low FWHM; the larger pore size has very low pressure drop and greater throughput capacity, which minimizes the number of filter changeouts.

Contrasting Backing Material:
The white backing of our FMLW filter is gridded to assist in identifying membrane orientation for the correct installation into sampling devices.

We are committed to bringing you Greener Alternative Products, which have been re-engineered to enable more sustainable research solutions. The inner & outer boxes containing the membrane discs are made from bio-circular material allocated using the ISCC mass balance approach. Click here for more information.
Need a custom membrane filter? Click here to request a custom membrane filter or unique and large package sizes that may not be available via our website.

Application

• Clarifying acids, bases, and solvents
• Filtering or venting gases
• UV spectroscopy
• Particle monitoring
• HPLC, UPLC, LC-MS/MS mobile phase filtration
• Microplastics analysis

Legal Information

Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany

Información de seguridad

• Clase de almacenamiento: 10-13 - German Storage Class 10 to 13