The tensile strength of acrylic sheets is 10,000 psi (69 MPa) at room temperature according to ASTM D638 1. However, stress cracking can be caused by continuous loads below this value . For most applications, continuously imposed design loads should not exceed 1,500 psi (10.4 MPa).
Z231363
Weighted safety shield
H 18 in.
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Seleccione un Tamaño
1 EA
MXP 16,651.00
MXP 16,651.00
Check Cart for Availability
Seleccione un Tamaño
Cambiar Vistas
1 EA
MXP 16,651.00
About This Item
Código UNSPSC:
46181702
NACRES:
NB.35
MXP 16,651.00
Check Cart for Availability
Productos recomendados
Materiales
transparent acrylic
envase
pkg of (packaged in one carton)
Altura
18 in.
457 mm
An × P
19 1/2 in. × 6 1/2 in.
grosor
3/8 in.
¿Está buscando productos similares? Visita Guía de comparación de productos
Categorías relacionadas
Descripción general
High impact resistance. Three-sided construction for stability and protection on both front and sides.
Ideal observation barrier. Work can be conducted behind the 3/8" shield, while workers or technicians are protected from splash, flying particles and 1 Mev of beta radiation. Shield incorporates a seamless one-piece acrylic barrier with straight front and two 45-degree angles.
The base is made from chemical resistant natural polypropylene and the base/platform is approximately 20" x 20" x 1/2" thick. On the underside of the base there are four rubber feet (one on each corner). The rubber feet provide cushioned protection for tabletops. All parts are pre-drilled and ready for assembly. Stainless steel machine screws and self-locking nuts also included.
Phillips Head Screwdriver and small adjustable wrench are required for assembly. Because the product may be used where splash could occur, an indirect vent Face-Fit cover goggle is included.
Suitable for compliance with OSHA CFR Part1910.1030.
Ideal observation barrier. Work can be conducted behind the 3/8" shield, while workers or technicians are protected from splash, flying particles and 1 Mev of beta radiation. Shield incorporates a seamless one-piece acrylic barrier with straight front and two 45-degree angles.
The base is made from chemical resistant natural polypropylene and the base/platform is approximately 20" x 20" x 1/2" thick. On the underside of the base there are four rubber feet (one on each corner). The rubber feet provide cushioned protection for tabletops. All parts are pre-drilled and ready for assembly. Stainless steel machine screws and self-locking nuts also included.
Phillips Head Screwdriver and small adjustable wrench are required for assembly. Because the product may be used where splash could occur, an indirect vent Face-Fit cover goggle is included.
Suitable for compliance with OSHA CFR Part1910.1030.
Aplicación
This product is designed to act as an "engineering control" or barrier to provide a degree of protection for those in front of the barrier from splashing and splattering. This shield will not provide any degree of protection from an "explosive" incident.
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
Lot/Batch Number
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.
Si necesita más asistencia, póngase en contacto con Atención al cliente
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
-
May I ask what maximum pressure or force this shield can withstand？
1 answer-
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
