Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

Z221171

Sigma-Aldrich

Aldrich® sublimation apparatus

capacity, ≤ 3 g starting material

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización

Seleccione un Tamaño

1 EA
MXP 17,389.00

MXP 17,389.00

Check Cart for Availability
Todas las fotos(1)

Seleccione un Tamaño

Cambiar Vistas
1 EA
MXP 17,389.00

About This Item

Código UNSPSC:
41121800
NACRES:
NB.43

MXP 17,389.00

Check Cart for Availability

Características

capacity≤ 3 g starting material

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Descripción general

With reversed, screw-thread ST joint and 2 mm glass stopcock. O-ring seals joint without grease, thus eliminating contamination when removing sublimator head. Flat-bottom on inner tube for easy sample removal.

Operation:
1. Place material to be sublimated in bottom of lower vessel
2. Attach condenser assembly to the lower vessel and tighten red cap nut
3. Connect coolant supply hose to upper hose connector and coolant return hose to lower connector
4. Connect vacuum source to stopcock hose connection
5. Place lower vessel into heating mantle, sand bath or high temperature silicone oil bath
6. Use a laboratory thermometer or thermocouple in the mantle, sand or oil to monitor temperature
7. Start flow of coolant through condenser assembly
8. Evacuate lower vessel
9. Turn on heating mantle
10. Sublimation begins

Components:
Z557072, Aldrich sublimation head, for Z221163
Z557056, Aldrich sublimation head, for Z221171
Z557080, Aldrich sublimation reservoir, for Z221163
Z557064, Aldrich sublimation reservoir, for Z221171

Información legal

Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.

Si necesita más asistencia, póngase en contacto con Atención al cliente

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Questions

1–2 of 2 Questions  

  1. What is the Department of Transportation shipping information for this product?

    1 answer

    1. Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.

      Helpful?

  2. Are the hose barbs for Product Z231215 the same as those on Product Z221171? And what is the approximate outside diameter? And what type of tubing should I use?

    1 answer

    1. All three dimensions (as shown by the red arrows in the image below) are the same:The hose barbs for Product Z231215 are the same as those on the Z221171 (approximately 5/16 inch outside diameter).Heavy-walled tubing with an inside diameter of 1/4 in (approx. 6 mm) would work fine. The outside diameter of the hose barb is around 5/16 in (8 mm). You want the tubing to stretch a little bit so that you get a tight seal.

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico