Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

94098

Sigma-Aldrich

Drying pearls orange

Sinónimos:

Aluminum silicate, Silica gel orange

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización

Seleccione un Tamaño

500 G
MXP 1,653.00
1 KG
MXP 2,825.00

MXP 1,653.00

Check Cart for Availability
Solicitar un pedido a granel
Todas las fotos(1)

Seleccione un Tamaño

Cambiar Vistas
500 G
MXP 1,653.00
1 KG
MXP 2,825.00

About This Item

Número de CAS:
1327-36-2
Número MDL:
MFCD03098976
Código UNSPSC:
41123003
NACRES:
NA.22

MXP 1,653.00

Check Cart for Availability
Solicitar un pedido a granel

descripción

heavy metal free

Formulario

beads

capacidad

>30 % absorption capacity (water)(at 80% rel. humidity, 25°C)

cadena SMILES

[Si](=O)=O

Clave InChI

VYPSYNLAJGMNEJ-UHFFFAOYSA-N

Descripción general

Drying pearls Orange (Silica gel orange), commonly used as a drying agent in laboratories, is suitable for drying all gases and solids. It is used in desiccators, drying towers, and absorption tubes. Silica gel orange provides longer storage conditions due to its large surface area which enables high absorption capacity. It also changes its color from orange to colorless after moisture absorption (approx. 6 wt% load).[1][2][3]

Reconstitución

regeneration by drying at 130 - 160 °C; do not heat above 160 °C

Código de clase de almacenamiento

13 - Non Combustible Solids

Clase de riesgo para el agua (WGK)

nwg

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
BCCN0745
BCCL6132
BCCM2068
BCCK3872
BCCK9451

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

M Zabeti et al.
Bioresource technology, 118, 374-381 (2012-06-19)
Canadian pinewood was pyrolyzed at 450 °C in an Infrared oven and the pyrolysis vapors were converted by passing through a catalyst bed at 450 °C. The catalysts studied were amorphous silica alumina (ASA) containing alkali metal or alkaline earth
Georgios Toskas et al.
ACS applied materials & interfaces, 3(9), 3673-3681 (2011-08-24)
Ceramic silica (SiO(2)) hybrid nanofibers were prepared by electrospinning of solutions containing biocompatible polymer and modified silica precursors. The new hybrid nanofibers are based on polyethylene oxide (PEO) and a new solution of modified sol-gel particles of mixture containing tetraethoxysilane
Jamieson K Christie et al.
The journal of physical chemistry. B, 116(41), 12614-12620 (2012-09-18)
The low solubility (high durability) of yttrium aluminosilicate (YAS) glass is one of its most important properties for use in in situ radiotherapy. Simple parameters, such as silica or yttria content or network connectivity, are not sufficient to rationalize the
Proton conductivity in silica gels
Schober T
Ionics, 12(2), 131-134 (2006)
Dun-Yen Kang et al.
ACS applied materials & interfaces, 4(2), 965-976 (2012-01-21)
The fabrication, detailed characterization, and molecular transport properties of nanocomposite membranes containing high fractions (up to 40 vol %) of individually-dispersed aluminosilicate single-walled nanotubes (SWNTs) in poly(vinyl alcohol) (PVA), are reported. The microstructure, SWNT dispersion, SWNT dimensions, and intertubular distances
Ver todos los artículos relacionados

Questions

1–3 of 3 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  3. Bonjour, quelle est la couleur des perles quand c'est sec et quand c’est humide? Quelle est la température et le temps nécessaire pour régénérer ces perles? Merci d'avance!

    1 answer

    1. This material changes its color from orange to colorless after moisture absorption (approx. 6 wt% load). The protocol for the regeneration is to spread the beads in a thin layer (max 10 mm) in a oven tray, preheat the oven at 110-130C, dry the beads for 90 minutes (or more if after 90 minutes the color is not orange again), and let them cool and place in a airtight container.

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico