![2-[3-(2H-Benzotriazol-2-il)-4-hidroxifenil]etilmetacrilato 99%](/deepweb/assets/sigmaaldrich/product/structures/208/967/cf29567e-c125-41dc-b80a-66889fa1a679/640/cf29567e-c125-41dc-b80a-66889fa1a679.png)
For a larger printer, an ester solvent, such as Carbitol Acetate, is recommended. This is primarily due to the compatibility with most industrial print-heads. However, this assumes that the ink has not be cured. If the ink is cured, ultrasonic cleaning and back flushing may remove the cured ink. Any light source is to be avoided at all times to prevent curing of the ink in and around the print-head.
901974
SunTronic® UV curing jettable insulator for low-K dielectric applications
Sinónimos:
Inkjet UV insulator, SunTronic® U6415 JET9525 clear dielectric, UV curing insulator coating, dielectric ink
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Seleccione un Tamaño
250 ML
MXP 5,500.00
Seleccione un Tamaño
Cambiar Vistas
250 ML
MXP 5,500.00
About This Item
Código UNSPSC:
12352103
NACRES:
NA.23
Productos recomendados
descripción
Cure dose required (un-doped mercury): 100-300 mJ/cm2
Jetting temperature: 50°C
Formulario
liquid
características de los productos alternativos más sostenibles
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.
sustainability
Greener Alternative Product
tensión superficial
32-37 mN/m
viscosidad
11-13 cP (at jetting temperature)
categoría alternativa más sostenible
temp. de almacenamiento
2-8°C
Categorías relacionadas
Descripción general
SunTronic jettable insulator is a UV-curing, inkjet printable insulator coating,suitable for low-K dielectric applications, printed electronics and related applications.
The insulator can be jetted through various piezo DOD inkjet printheads, although full printhead compatibility will need to be verified in each case. The product can be cured using an un-doped medium pressure mercury source. If over printing the dielectric with a SunTronic jettable silver ink then a cure dose of 300 mJ/cm2 is recommended.
The insulator can be jetted through various piezo DOD inkjet printheads, although full printhead compatibility will need to be verified in each case. The product can be cured using an un-doped medium pressure mercury source. If over printing the dielectric with a SunTronic jettable silver ink then a cure dose of 300 mJ/cm2 is recommended.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Click here for more information.
Información legal
SunTronic is a registered trademark of Sun Chemical, Inc.
Palabra de señalización
Danger
Frases de peligro
Consejos de prudencia
Clasificaciones de peligro
Aquatic Chronic 2 - Eye Irrit. 2 - Repr. 2 - Skin Irrit. 2 - Skin Sens. 1 - STOT RE 1 - STOT SE 3
Órganos de actuación
Liver,Upper respiratory tract, Respiratory system
Código de clase de almacenamiento
6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
Clase de riesgo para el agua (WGK)
WGK 2
Punto de inflamabilidad (°F)
204.8 °F
Punto de inflamabilidad (°C)
96 °C
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Artículos
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
-
What chemicals (besides acetone, isopropyl) are necessary for cleaning this ink from the nozzles and pipes of the inkjet system?
1 answer-
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
