The density of the SnO₂/F coating is not determined. The coating thickness is approximately 550 nm. External sources report the density of SnO₂ at a range of 6.95 - 7.0 g/cm3. The density of SnO₂/F is expected to be similar.
735140
Fluorine doped tin oxide coated glass slide
L × W × thickness 50 mm × 50 mm × 2.2 mm, surface resistivity ~7 Ω/sq
Sinónimos:
TEC 7, FTO glass
Seleccione un Tamaño
Seleccione un Tamaño
About This Item
Productos recomendados
descripción
Haze: 5%
Nivel de calidad
composición
SnO2/F
envase
set of 5
resistividad de superficie
~7 Ω/sq
L × An × grosor
50 mm × 50 mm × 2.2 mm
transmitancia
80-82% (visible)
¿Está buscando productos similares? Visita Guía de comparación de productos
Categorías relacionadas
Descripción general
Aplicación
- Procyanidin B2 is used as a reference standard: It is used for assessing the proanthocyanidin content in cranberries using 4-(Dimethylamino)cinnamaldehyde Assay. This standard helps in quantifying and characterizing the proanthocyanidin content in cranberries by providing a known benchmark for comparison. (Feliciano et al., 2012).
Código de clase de almacenamiento
13 - Non Combustible Solids
Clase de riesgo para el agua (WGK)
WGK 2
Punto de inflamabilidad (°F)
Not applicable
Punto de inflamabilidad (°C)
Not applicable
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Artículos
Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.
A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.
Next generation solar cells have the potential to achieve conversion efficiencies beyond the Shockley-Queisser (S-Q) limit while also significantly lowering production costs.
Dr. Perini and Professor Correa-Baena discuss the latest research and effort to obtain higher performance and stability of perovskite materials.
-
What is the density of the FTO
1 answer-
Helpful?
-
-
What is the maximum operating temperature of the fluorine-doped tin oxide coated glass slide with product number 735140?
1 answer-
The maximum operating temperature for this product is 450°C.
Helpful?
-
-
What is the thickness of the FTO layer?
1 answer-
As stated in the DESCIPTION section of the product page, the FTO coating thickness is ∼ 550 nm.
Helpful?
-
-
What is the maximum operation temperature of Florine dopped tin oxide coated glass slide? Product number- 735140
1 answer-
The maximum operating temperature for this product is 450°C.
Helpful?
-
-
What is the Department of Transportation shipping information for this product?
1 answer-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Helpful?
-
-
What type of glass is used for the fluorine doped tin oxide coated glass slides?
1 answer-
The fluorine doped tin oxide (FTO) coated glass slides use TEC GlassTM from Pilkington.
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico