Saltar al contenido
Merck
Todas las fotos(2)

Documentos clave

Ver Toda la documentación

695890

Sigma-Aldrich

Phosphoric acid 2-hydroxyethyl methacrylate ester

contains 700-1000 ppm monomethyl ether hydroquinone, 90%

Sinónimos:

2-Hydroxyethyl methacrylate phosphate

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización

Seleccione un Tamaño

100 ML
MXP 1,326.00
250 ML
MXP 2,616.00

MXP 1,326.00

Check Cart for Availability
Solicitar un pedido a granel
Todas las fotos(2)

Seleccione un Tamaño

Cambiar Vistas
100 ML
MXP 1,326.00
250 ML
MXP 2,616.00

About This Item

Fórmula lineal:
C6H10O3 · xH3PO4
Número de CAS:
52628-03-2
Número MDL:
MFCD28045008
Código UNSPSC:
12162002
NACRES:
NA.23

MXP 1,326.00

Check Cart for Availability
Solicitar un pedido a granel

descripción

~25% diester content

Nivel de calidad

100

Ensayo

90%

Formulario

liquid

contiene

700-1000 ppm monomethyl ether hydroquinone

índice de refracción

n20/D 1.4688

densidad

1.37 g/mL at 25 °C

temp. de almacenamiento

2-8°C

cadena SMILES

[P](=O)(O)(O)O.O(CCO)C(=O)C(=C)C

InChI

1S/C6H10O3.H3O4P/c1-5(2)6(8)9-4-3-7;1-5(2,3)4/h7H,1,3-4H2,2H3;(H3,1,2,3,4)

Clave InChI

POLZHVHESHDZRD-UHFFFAOYSA-N

Categorías relacionadas

Descripción general

Phosphoric acid 2-hydroxyethyl methacrylate ester is a phosphoric acid based ester which is composed of phosphoric acid monomer and diethyl methacrylate. It can be used as a chelating absorbent due to its high affinity towards metal ions.[1][2]

Aplicación

Phosphoric acid 2-hydroxyethyl methacrylate ester is used in surface functionalization of polytetrafluoroethylene (PTFE) for craniofacial applications.[3]

Pictogramas

CorrosionExclamation mark
GHS05,GHS07

Palabra de señalización

Danger

Frases de peligro

H290,H302,H314,H335

Clasificaciones de peligro

Acute Tox. 4 Oral - Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1B - STOT SE 3

Órganos de actuación

Respiratory system

Código de clase de almacenamiento

8A - Combustible corrosive hazardous materials

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

293.0 °F - open cup

Punto de inflamabilidad (°C)

145 °C - open cup

Equipo de protección personal

Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCW8536
MKCT3004
MKCQ8440
MKCN0327
MKCL1600

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 1

1 of 1

Vinylphosphonic acid ≥90% (T)

Sigma-Aldrich

672068

Vinylphosphonic acid

Influence of self-etching primer treatment on the adhesion of resin composite to polished dentin and enamel
Hayakawa T, et al.
Dental Materials : Official Publication of the Academy of Dental Materials, 14(2), 99-105 (1998)
Lisbeth Grøndahl et al.
Chemical communications (Cambridge, England), (28)(28), 3314-3316 (2008-07-16)
We have demonstrated that the unacknowledged presence of almost 30% diene impurity in some commercial phosphate monomers had not only a significant effect on the molecular structure (topology) of a series of synthesized polymers but the instability of the ester
D J Epasinghe et al.
Journal of dentistry, 40(3), 173-180 (2011-12-14)
This study evaluated the effect of proanthocyanidin (PA) incorporation into experimental dental adhesives on resin-dentine bond strength. Four experimental hydrophilic adhesives containing different PA concentrations were prepared by combining 50wt% resin comonomer mixtures with 50wt% ethanol. Proanthocyanidin was added to
C A Munoz-Viveros
Compendium of continuing education in dentistry. (Jamesburg, N.J. : 1995). Supplement, (23)(23), S3-S5 (2002-07-02)
With the constant advance of technology and the public's increasing awareness of esthetically pleasing restorations, alternatives for amalgam and early composite materials have been brought to the forefront of dentistry. Condensable composites offer characteristics that distinguish them from their traditional
Byoung I Suh et al.
The journal of adhesive dentistry, 5(4), 267-282 (2004-03-11)
This study examined the polymerization kinetics of acid-contaminated light- and chemically-cured resins with the use of differential scanning calorimetry. Light-cured and chemically-cured versions of an experimental bis-GMA/TEG-DMA resin at the ratio (w:w) of 62:38 were prepared. Four acidic resin monomers
Ver todos los artículos relacionados

Questions

1–2 of 2 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico