Saltar al contenido
Merck

427209

Sigma-Aldrich

Poly(ethylene-co-tetrafluoroethylene)

melt index 11 g/10 min (279°C/49 newton), pellets

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
(CH2CH2)x(CF2CF2)y
Número de CAS:
Número MDL:
Código UNSPSC:
12162002
ID de la sustancia en PubChem:
NACRES:
NA.23

descripción

coefficient of friction 0.53 Dynamic, p=110 lbs,
velocity=0.08-0.35 cm/sec

Formulario

pellets

índice de fusión

11 g/10 min (279°C/49 newton)

dureza

50-58 (Rockwell R, ASTM D 785)

índice de refracción

n20/D 1.3

temperatura de transición

brittleness temperature -125 °C (ASTM D 746)
Tm 250-270 °C (ASTM D 3418)

densidad

1.73 g/mL at 25 °C (lit.)

cadena SMILES

C=C.F\C(F)=C(\F)F

InChI

1S/C2F4.C2H4/c3-1(4)2(5)6;1-2/h;1-2H2

Clave InChI

QHSJIZLJUFMIFP-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Aplicación

Injection molding and extrusion for wire coatings, tubes, films and monofilaments.

Características y beneficios

Mechanical properties are superior to perfluorinated polymers like PTFE and PFA. Excellent performance over a wide temperature range and good electrical insulating properties over a wide temperature and frequency range.

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

T Paulos et al.
Risk analysis : an official publication of the Society for Risk Analysis, 18(4), 471-510 (1998-10-17)
This paper investigates electrical overheating events aboard a habitable spacecraft. The wire insulation involved in these failures plays a major role in the entire event scenario from threat development to detection and damage assessment. Ideally, if models of wire overheating
Kristin J Pawlowski et al.
Frontiers in bioscience : a journal and virtual library, 9, 1412-1421 (2004-02-24)
Pioneers in the field of small diameter graft development sought to promote graft endothelialization and, thereby, increase patency by transplanting a varying degree of autologous endothelial cells onto vascular grafts prior to implantation. This process has become known as endothelial
M L Raimondi et al.
Journal of biomedical materials research, 29(1), 59-63 (1995-01-01)
The release behavior of typical commercial tissue expanders has been examined by carrying out two kinds of experiments: 1) Determination of chemical nature and its modification after in vivo use by X-ray photoelectron spectroscopy for chemical analysis. This study has
Anthony G Gegauff et al.
Dental materials : official publication of the Academy of Dental Materials, 18(6), 479-485 (2002-07-06)
This pilot study was conducted to explore selected commercially-available thermoplastic composites that potentially had physical properties superior to currently available dental systems for restoring esthetic posterior crowns. Polyurethane, polycarbonate, and poly(ethylene/tetrafluoroethylene) (ETFE) composites and unfilled polyurethane specimens were injection molded
H Kaplan et al.
The Biochemical journal, 217(1), 135-143 (1984-01-01)
A modification to the competitive labelling procedure of Duggleby and Kaplan [(1975) Biochemistry 14, 5168-5175] was used to study the reactivity of the N-termini, lysine, histidine and tyrosine groups of insulin over the concentration range 1 X 10(-3)-1 X 10(-7)M.

Questions

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico