TSTP04700

Polycarbonate Membrane Filter, 3.0 μm Pore Size

Isopore^™, filter diam. 47 mm, hydrophilic

• Synonym(s): Isopore^™ Membrane Filter
• UNSPSC Code: 40161507
• eCl@ss: 32031602
• NACRES: NB.24

Properties

• material: plain filter; polycarbonate membrane; white filter
• sterility: non-sterile
• feature: hydrophilic
• manufacturer/tradename: Isopore^™; Millipore
• parameter: 0.868 L/min-cm²-psi air flow rate; 140 °C max. temp.; 3628 mL/min-cm²-psi water flow rate (maximum flow rate per 1.0 psi); ~475 mL/min-cm² water flow rate at 10 psi (typical results)
• filter diam.: 47 mm
• thickness: 22 μm
• gravimetric extractables: <1%
• refractive index: n/D 1.6
• matrix: Isopore^™
• pore size: 11.3 % porosity; 3.0 μm pore size
• bubble point: ≥0.32 bar, air with water at 23 °C
• shipped in: ambient

Description

General description

The Isopore^™ membrane is a polycarbonate that allows sample visualization on membrane surface using optical or electron microscopy. Due to precise pore diameter and consistent pore size, it allows size-based sample separation with accuracy. It may be useful in chemotaxis assay, air monitoring, and epifluorescent microscopy.

Application

• Chemotaxis
• Bioassays
• Cytology
• Air monitoring
• Microplastics analysis

Isopore^™ membrane filter has been used to:

• filter microplastics associated with microbes from seawater samples
• wrap and encapsulate tumor for implantation in mice to mimic anti-angiogenic (AA) therapy
• filter out phytoplankton and large-sized particles
• hold mammalian cell lines for ultraviolet (UV) irradiation studies

Features and Benefits

• Isopore^™ membranes have low background interference.
• Particle retention on the membrane surface favorable for counting and analysis.
• Non-hygroscopic and translucent material.
• Rapid sample drying and analysis time.
• Also available in a brown variety.

Caution

Possible reduction in flow rates may occur after autoclaving.

Legal Information

ISOPORE is a trademark of Merck KGaA, Darmstadt, Germany