推荐产品
等級
puriss.
品質等級
化驗
98-102.5%
形狀
powder
品質
meets analytical specification of Ph. Eur., BP, USP
雜質
organic volatile impurities, complies
residual solvents, complies
≤0.003% heavy metals (as Pb)
≤0.1% insoluble in HCl
損耗
24.5-26.5% loss on ignition, 800 °C
負離子痕跡
carbonate (CO32-): in accordance
chloride (Cl-): ≤200 mg/kg
fluoride (F-): ≤50 mg/kg
sulfate (SO42-): ≤3000 mg/kg
正離子痕跡
As: ≤1 mg/kg
Ba:, in accordance (Ph Eur)
Ba:, in accordance (USP)
Fe: ≤300 mg/kg
SMILES 字串
O.O.[Ca++].OP([O-])([O-])=O
InChI
1S/Ca.H3O4P.2H2O/c;1-5(2,3)4;;/h;(H3,1,2,3,4);2*1H2/q+2;;;/p-2
InChI 密鑰
XAAHAAMILDNBPS-UHFFFAOYSA-L
正在寻找类似产品? 访问 产品对比指南
相关类别
應用
- Simultaneous Regulation of the Mechanical/Osteogenic Capacity of Brushite Calcium Phosphate Cement by Incorporating with Poly(ethylene glycol) Dicarboxylic Acid: This research investigates enhancing brushite calcium phosphate cements by adding poly(ethylene glycol) dicarboxylic acid to improve mechanical properties and osteogenic capabilities, applicable in bone regeneration and implant materials. (Gao et al., 2024).
- Biosurfactant-Assisted Cu Doping of Brushite Coatings: Explores the structural and biofunctional enhancements of brushite coatings through copper doping facilitated by biosurfactants, which could revolutionize surface treatments for biocompatible implants and devices. (Siva Prasad et al., 2024).
- Self-Healing Micro Arc Oxidation and Dicalcium Phosphate Dihydrate Double-Passivated Coating on Magnesium Membrane for Enhanced Bone Integration Repair: This study highlights the application of calcium phosphate dibasic dihydrate in developing protective coatings on magnesium-based implants, significantly advancing orthopedic and dental implant technologies. (Wu et al., 2024).
- Physiologically Engineered Porous Titanium/Brushite Scaffolds for Critical-Size Bone Defects: Details the design and fabrication of novel scaffolds for treating large bone defects, utilizing a combination of titanium and brushite, highlighting its potential in reconstructive surgery and regenerative medicine. (Abdulaziz et al., 2023).
- Mechanochemical Synthesis of Cerium Chlorapatite from a Mixture of Cerium Chloride Heptahydrate, Dicalcium Phosphate Dihydrate, and Calcium Hydroxide for Biomedical Application: Focuses on the innovative production of cerium chlorapatite using dicalcium phosphate dihydrate, showcasing its potential in biomedical engineering, especially in drug delivery and tissue engineering. (Otsuka et al., 2024).
訊號詞
Warning
危險聲明
危險分類
Eye Irrit. 2 - Skin Irrit. 2 - STOT SE 3
標靶器官
Respiratory system
儲存類別代碼
11 - Combustible Solids
水污染物質分類(WGK)
WGK 1
閃點(°F)
Not applicable
閃點(°C)
Not applicable
Journal of pharmaceutical sciences, 66(11), 1636-1637 (1977-11-01)
The aging of direct compression tablets made using dibasic calcium phosphate dihydrate as the tablet matrix was investigated over 16 weeks. The formula included 6% amaranth as a dye tracer. Two sets of stress storage conditions were used: 25 degrees
Chemical & Pharmaceutical Bulletin, 868-870 (1996)
Caries research, 43(6), 474-483 (2009-12-18)
The aims of this study were: (1) to correlate surface (SH) and cross-sectional hardness (CSH) with microradiographic parameters of artificial enamel lesions; (2) to compare lesions prepared by different protocols. Fifty bovine enamel specimens were allocated by stratified randomisation according
Acta biomaterialia, 7(4), 1817-1826 (2010-12-15)
In part I of this study we aim to evaluate and control the characteristics of the powders constituting the solid phase of a vaterite CaCO(3)-dicalcium phosphate dihydrate cement using a co-grinding process and to determine their impact on cement setting
Journal of orthopaedic surgery and research, 6, 56-56 (2011-11-08)
Uncemented fixation of components in joint arthroplasty is achieved primarily through de novo bone formation at the bone-implant interface and establishment of a biological and mechanical interlock. In order to enhance bone-implant integration osteoconductive coatings and the methods of application
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门