推荐产品
材料
PTFE
polypropylene
polypropylene support
silicone seal
品質等級
無菌
non-sterile
滅菌相容性
steam-in-place compatible
產品線
Aervent®
特點
hydrophobic
製造商/商標名
Aervent®
參數
≤72 mL/min nitrogen diffusion at 970 mbar (14 psig) and 23 °C (in 70/30% IPA/water)
1.7 bar max. inlet pressure (25 psi) at 80 °C
1.8 bar max. differential pressure (25 psid) at 80 °C (Forward)
4.1 bar max. differential pressure (60 psid) (Reverse; intermittent)
4.1 bar max. inlet pressure (60 psi) (Reverse; Intermittent)
5.5 bar max. differential pressure (80 psid) at 25 °C (Forward)
5.5 bar max. inlet pressure (80 psi) at 25 °C (Forward)
技術
gas filtration: suitable
長度
30 in.
寬度
2.7 in.
柱標稱長度
30 in. (76 cm)
直徑
6.9 cm (2.7 in.)
過濾面積
1.95 m2
雜質
<0.25 EU/mL USP bacterial endotoxins (LAL test, aqueous extraction)
重量法萃取物
≤105 mg/cartridge
基質
Aervent®
孔徑
0.2 μm pore size
輸入
sample type gas
起泡點
≥1100 mbar (16 psig), nitrogen with 70/30% IPA/water at 23 °C
柱代碼
Code 0 (2-222; O-rings)
正在寻找类似产品? 访问 产品对比指南
相关类别
一般說明
特點和優勢
包裝
品質
準備報告
150 (100 forward/50 reverse) SIP cycles of 30 min @ 145 °C
分析報告
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
其他說明
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
法律資訊
未找到合适的产品?
试试我们的产品选型工具.
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门