MPGP04001

Millipak^® Express Filter

0.22 µm membrane filter for particulate-free and bacteria-free water at the point of dispense, For use with Elix^® Advantage and Milli-Q^® Advantage A10 / Direct / Integral / Reference systems

• Synonym(s): Millipak^® Express 40 Filter
• UNSPSC Code: 41104212
• eCl@ss: 33050190
• NACRES: JA.14

Properties

• material: polyethersulfone filter; styrene-acrylonitrile (SAN) housing
• Quality Level: 300
• sterility: non-sterile
• feature: removal of particulates and bacteria
• packaging: pkg of 1 unit
• manufacturer/tradename: Millipak^®
• matrix: Durapore^®
• pore size: 0.22 μm pore size
• compatibility: for use with Elix^® Advantage; for use with Milli-Q^® Advantage A10; for use with Milli-Q^® Direct; for use with Milli-Q^® Integral; for use with Milli-Q^® Reference
• shipped in: ambient

Description

General description

The Millipak^® 0.22 μm hydrophilic membrane filter produces particulate- and bacteria-free water at the point of dispense of the Milli-Q^® Integral, Milli-Q^® Advantage A10, Milli-Q^® Direct, Milli-Q^® Reference and Milli-Q^® Reference A+ water purification systems. The filter is designed with a 0.22 μm PES (polyethersulfone) asymmetric membrane filter, heat-sealed on a styrene acrylonitrile housing. This minimizes organic and inorganic extractable release.

Application

Provides filtered water suitable for most analytical techniques used in the laboratory (e.g., preparation of solutions used in spectrophotometry, pH measurement, titrations, atomic absorption, Kjeldahl analysis, and HPLC).

Features and Benefits

• The membrane is supported by a rigid plastic disc with channels that ensures high water flow and resistance to pressure variations without the risk of membrane rupture.
• Millipak^® membrane filters use the unique, clean stacked disc design, allowing minimal hold-up volume and particle shedding.
• The filters are designed with a 0.22 μm PES (polyethersulfone) asymmetric membrane filter heat-sealed on a SAN (styrene acrylonitrile) housing.
• The membrane′s conical pores allow a high flow rate at a low differential pressure.
• The membrane, housing material and production processes have been selected to minimize organic and inorganic extractable release.
• Connects to the outlet of the water delivery point, such as the PODs of Milli-Q^® water purification systems.
• The protective bell protects against intrusion of airborne bacteria contamination during dispensing.
• Each filter is individually tested and delivered with a Certificate of Quality.
• Care-free maintenance: the filter is easily fitted and replaced.

Components

0.22 μm membrane filter

Other Notes

Directions for Use

• Organism Retention: Microorganisms
• Mode of Action: Filtering
• Application: General laboratory analysis
• Intended Use: Water purification
• Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to system equipment user guide section "Using the System" (available on USB key in the system box).
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

ELIX is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany