Accéder au contenu
Merck

Biological pretreatment for production of lignocellulosic biofuel.

Bioresource technology (2012-05-24)
L Lemée, D Kpogbemabou, L Pinard, R Beauchet, J Laduranty
RÉSUMÉ

Lignocellulosic biomass was submitted to a biological pretreatment prior to a catalytic hydroliquefaction in order to produce biofuel. The biodegradation process was conducted over 3 months in a reactor under controlled conditions. During the biodegradation process the organic matter was characterised and its evolution was correlated with physico-chemical parameters. In parallel with the analysis of the lipidic fraction, analytical pyrolysis was used to monitor bacterial activity. The alterations of branched to linear fatty acids ratio and of mono- to diacids ratio were compared when determined by thermochemolysis and observed in the directly extractable lipids. The evolution of the phytol to the corresponding isoprenoic ketone ratio was observed to be dependent on the desorption technique since it decreases using headspace while it increases using pyrolysis. "Humic"/"fulvic acids" ratio, infrared spectroscopy and thermodifferential analysis were used to determine the degree of OM complexification.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Hydroxyde de tétraméthylammonium pentahydrate, ≥97%
Sigma-Aldrich
Tetramethylammonium chloride solution, for molecular biology
Sigma-Aldrich
Hydroxyde de tétraméthylammonium pentahydrate, ≥95.0% (T)
Sigma-Aldrich
Tetramethylammonium fluoride, 97%
Sigma-Aldrich
Tetramethylammonium iodide, 99%
Sigma-Aldrich
Hydroxyde de tétraméthylammonium solution, 25 wt. % in H2O
Sigma-Aldrich
Chlorure de tétraméthylammonium, BioUltra, for molecular biology, ≥99.0% (AT)
Sigma-Aldrich
Chlorure de tétraméthylammonium, reagent grade, ≥98%
Sigma-Aldrich
Hydroxyde de tétraméthylammonium solution, 25 wt. % in methanol
Sigma-Aldrich
Hydroxyde de tétraméthylammonium solution, ACS reagent
Sigma-Aldrich
Hydroxyde de tétraméthylammonium solution, 10 wt. % in H2O
Sigma-Aldrich
Bromure de tétraméthylammonium, 98%
Sigma-Aldrich
Bromure de tétraméthylammonium, ACS reagent, ≥98.0%
Supelco
Chlorure de tétraméthylammonium, suitable for ion pair chromatography, LiChropur, ≥99.0% (AT)
Supelco
Sulfate de tétraméthylammonium, suitable for ion pair chromatography, LiChropur, ≥99.0% (T)
Supelco
Bromure de tétraméthylammonium, suitable for ion pair chromatography, LiChropur, ≥99.0% (AT)