Accéder au contenu
Merck
Toutes les photos(5)

Key Documents

920967

Sigma-Aldrich

Monolayer hexagonal Boron Nitride (hBN) on copper foil

size 3 in. (3 in.) × 76 mm (76 mm)

Synonyme(s) :

Boronitrene, Hexagonal boron nitride monolayer, Single-layer hexagonal boron nitride, White graphene

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme


About This Item

Formule linéaire :
h-BN
Numéro CAS:
Numéro MDL:
Nomenclature NACRES :
NA.23

Description

Bandgap: 5.97 eV
Monolayer h-BN
Raman Peak: 1370 /cm-1
h-BN Coverage: 100% with sporadic adlayers

Niveau de qualité

Taille

3 in. (3 in.) × 76 mm (76 mm)

Granulométrie

>4 μm

InChI

1S/BN/c1-2

Clé InChI

PZNSFCLAULLKQX-UHFFFAOYSA-N

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Description générale

For all hBN-on-copper products, the displayed range represents electronic data that were obtained after transfer hBN to SiO2. Your own metrics will depend entirely on the transfer methods that you use, and the resultant quality of your transfers.

Application

Monolayer hexagonal boron nitride (h-BN), also known as “white graphene”, is a wide-bandgap 2D crystal (~6 eV that can be tuned to ~2 eV) with exceptional strength , large oxidation resistance at high temperatures , and optical functionalities.
Among its potential applications are:
  • Two-dimensional electronics
  • Nanophotonic and other optoelectronic devices †††
  • Quantum communication and information science
  • Aerospace industry
  • MEMS and NEMS
  • Micro-/nano- actuators
  • Insulating/transparent coatings

Notes préparatoires

Which side contains hBN? Both sides of the copper foil contain hBN. We primarily recommend that the customer only use the material on the top side (i.e. the side that has Kapton tape) because it is the only side that is guaranteed not to have been in physical contact with anything and therefore should not have any potential physical damage. However, the underside can be used if one is careful and doesn’t mind the damage potential.

Stockage et stabilité

To ensure the maximum shelf life of your hBN sample, it is best stored under vacuum or in inert atmosphere (Argon or Nitrogen) conditions once the vacuum sealed package has been opened.

Substrats

3” x 3” h-BN/copper foil pieces are secured to their underlying plastic containers with four small Kapton tape pieces, one in each corner. Gently peel the tape or cut off the corners of the foil to release the foil from the plastic container.

Code de la classe de stockage

13 - Non Combustible Solids

Classe de danger pour l'eau (WGK)

WGK 2

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable


Faites votre choix parmi les versions les plus récentes :

Certificats d'analyse (COA)

Lot/Batch Number

Vous ne trouvez pas la bonne version ?

Si vous avez besoin d'une version particulière, vous pouvez rechercher un certificat spécifique par le numéro de lot.

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

From 2-D to 0-D Boron Nitride Materials, The Next Challenge
Stagi L, et al.
Materials, 12(23) (2019)
Chemical and Bandgap Engineering in Monolayer Hexagonal Boron Nitride
Ba K, et al.
Scientific reports, 7 (2017)
Hexagonal boron nitride nanomechanical resonators with spatially visualized motion
Zheng Xu, et al.
Microsystems & Nanoengineering, 3 (2017)
Piezoelectricity in Monolayer Hexagonal Boron Nitride
Ares P, et al.
Advanced Materials, 32 (2020)
Monolayer to Bulk Properties of Hexagonal Boron Nitride
Wickramaratne D, et al.
Physical Chemistry, 122, 25524-25529 (2018)

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique