Direkt zum Inhalt
Merck
  • Treatment of onychomycosis using a submillisecond 1064-nm neodymium:yttrium-aluminum-garnet laser.

Treatment of onychomycosis using a submillisecond 1064-nm neodymium:yttrium-aluminum-garnet laser.

Journal of the American Academy of Dermatology (2013-07-17)
Caitlin Carney, Wendy Cantrell, Judy Warner, Boni Elewski
ZUSAMMENFASSUNG

Laser treatment has emerged as a novel treatment modality for onychomycosis. We sought to determine thermal response and optical effects of a submillisecond neodymium:yttrium-aluminum-garnet (Nd:YAG) 1064-nm laser on common fungal nail pathogens, and the clinical efficacy and safety of the Nd:YAG 1064-nm laser on onychomycotic toenails. A 4-part in vitro and in vivo study was conducted using a Nd:YAG 1064-nm laser. The first portion evaluated 3 different nail pathogens in suspension at 7 heat and time exposures. The second and third parts of the study irradiated pure fungal colonies. The final portion involved an in vivo treatment of toenails over 5 treatment sessions. A fungicidal effect for Trichophyton rubrum was seen at 50°C after 15 minutes, and for Epidermophyton floccosum at 50°C after 10 minutes. Limited growth of Scytalidium was seen at 55°C after 5 minutes. No inhibition was observed after laser treatment of fungal colonies or suspensions. In vivo treatment of toenails showed no improvement in Onychomycosis Severity Index score. The Nd:YAG 1064-nm laser was the only laser tested. Laser treatment of onychomycosis was not related to thermal damage or direct laser effects. In vivo treatment did not result in onychomycosis cure.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Aluminium, powder, ≥91% (complexometric)
Sigma-Aldrich
Aluminium, wire, diam. 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, granular, <1 mm, 99.7% trace metals basis
Sigma-Aldrich
Aluminium, foil, thickness 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, ReagentPlus®, beads, 5-15 mm, 99.9% trace metals basis
Sigma-Aldrich
Aluminium, pellets, 3-12 mm, 99.99% trace metals basis
Sigma-Aldrich
Aluminium, foil, thickness 0.45-0.55 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, ACS reagent, 99%, wire, wire diam. ~1.5 mm
Sigma-Aldrich
Neodym, powder, −40 mesh, ≥99% trace rare earth metals basis
Sigma-Aldrich
Aluminium, foil, thickness 0.13 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Yttrium, chips, 99.9% trace rare earth metals basis
Sigma-Aldrich
Aluminium, wire, diam. 0.58 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Aluminium, foil, thickness 8 μm, 99% trace metals basis
Sigma-Aldrich
Aluminium, foil, thickness 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, evaporation slug, diam. × L 6.3 mm × 6.3 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, pellets, 3-8 mesh, ≥99.999% trace metals basis
Sigma-Aldrich
Yttrium-Sputtering-Target, diam. × thickness 2.00 in. × 0.25 in., 99.9% trace metals basis
Aluminium, IRMM®, certified reference material, 0.1 mm foil
Aluminium, IRMM®, certified reference material, 1.0 mm foil
Aluminium, IRMM®, certified reference material, 1.0 mm wire