CGW6M4S03
Polysep™ II 1.0/0.5 µm nominal, Cartridge
pore size 1.0/0.5 μm, cartridge nominal length 4 in. (10 cm), Code M (2-118; O-rings)
Synonym(s):
Polysep II Cartridge Filter 4 in. 0.5 μm Code M
About This Item
Recommended Products
material
borosilicate glass fiber (BGF) membrane
mixed cellulose esters (MCE) membrane
polypropylene
polypropylene support (Spun bonded)
silicone seal
Quality Level
reg. compliance
meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food)
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
non-sterile
Sterilization Compatibility
autoclavable compatible
steam-in-place compatible
product line
Polysep™
feature
hydrophilic
manufacturer/tradename
Polysep™
parameter
3.5 bar max. differential pressure (50 psid) at 25 °C
3.5 bar max. inlet pressure (50 psi) at 25 °C
technique(s)
prefiltration: suitable
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | CGW3M4S03 | CGW9M4S03 | CGW6N4S03 |
---|---|---|---|
prefiltration: suitable | prefiltration: suitable | prefiltration: suitable | prefiltration: suitable |
0.19 m2 | 0.19 m2 | 0.19 m2 | 0.19 m2 |
Polysep™ | Polysep™ | Polysep™ | Polysep™ |
Polysep™ II | Polysep™ II | Polysep™ II | Polysep™ II |
borosilicate glass fiber (BGF) membrane, polypropylene , silicone seal, mixed cellulose esters (MCE) membrane, polypropylene support (Spun bonded) | borosilicate glass fiber (BGF) membrane, mixed cellulose esters (MCE) membrane, polypropylene , polypropylene support (Spun bonded), silicone seal | borosilicate glass fiber (BGF) membrane, mixed cellulose esters (MCE) membrane, polypropylene , polypropylene support (Spun bonded), silicone seal | borosilicate glass fiber (BGF) prefilter, mixed cellulose esters (MCE) , polypropylene , polypropylene support (Spun bonded), silicone seal |
General description
Features and Benefits
Packaging
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer to the first page of Visual Inspection Guide and introduction section of the Mixed cellulose esters Tech Brief
- Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Preparation Note
30 min with hot water @ 80 °C
10 autoclave cycles or SIP @ 121 °C for 30 min
Analysis Note
Legal Information
Not finding the right product?
Try our Product Selector Tool.
Signal Word
Danger
Hazard Statements
Precautionary Statements
Hazard Classifications
Flam. Sol. 1
Storage Class Code
4.1B - Flammable solid hazardous materials
WGK
WGK 2
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service