형태
solid
포장
jar of 100 g
기술
HPLC: suitable
LPLC: suitable
ion chromatography: suitable
표면적
140 m2/g
기질
acrylic ester
기질 활성군
polymer
입자 크기
40-60 mesh
공극 크기
~0.79 mL/g pore volume
225 Å mean pore size
density
1.09 g/mL at 25 °C (true wet)(lit.)
1.23 g/mL at 25 °C (skeletal)(lit.)
분리 기술
reversed phase
유사한 제품을 찾으십니까? 방문 제품 비교 안내
일반 설명
Supelite DAX-8 is a nonfunctionalised resin with strong hydrophobic organic matter endorsed to humic and fulvic acids. It is also referred as polymethylmethacrylate resin.
애플리케이션
Supelite DAX-8 was used as an absorbent in:
- HPLC-SEC fractionation system
- column chromatography
- extraction procedure and extracts were analysed using Cary Eclipse fluorescence spectrophotometer
Adsorbent resin with moderate polarity for compounds up to 150,000 MW. Most commonly used for adsorption of fulvic and humic acids, treatment of paper pulp mill waste, and removal of alcohols, surfactants, and colorants from samples.
제조 메모
DAX-8 is a salt imbibed resin, which requires some preparation prior to use. In the protocol below, you may use methanol in place of ethanol.
- First, rinse the adsorbent resin with 2-3 bed volumes (BV) of distilled water.
- Soak overnight in 2 BV of 95% ethanol.
- After soaking, the resin is introduced into the column and rinsed with an additional 2 BV of 95% ethanol.
- Rinse with 2 BV of distilled water to displace the ethanol, followed by 1 BV of 4% (w/v) sodium hydroxide, 2 BV of distilled water, 1 BV 4% (v/v) hydrochloric acid, and finally by distilled water until the pH of the eluent becomes neutral.
법적 정보
Storage Class Code
11 - Combustible Solids
WGK
WGK 3
Flash Point (°F)
Not applicable
Flash Point (°C)
Not applicable
개인 보호 장비
Eyeshields, Gloves, type N95 (US)
가장 최신 버전 중 하나를 선택하세요:
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.