추천 제품
material
PVDF membrane
Quality Level
무균
non-sterile
특징
hydrophilic
파라미터
0.15 L/min-cm2 air flow rate
2.5 mL/min-cm2 water flow rate
두께
103 μm
기질
Durapore® PVDF
공극 크기
0.1 μm pore size
버블 포인트(bubble point)
73 psi at 23 °C
일반 설명
The Durapore® membrane provides high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophilic Durapore® membranes bind far less protein than nylon, nitrocellulose or PTFE membranes. The 0.1 μm pore size hydrophilic membrane is designed and manufactured for removal of particles and organisms
larger than 0.1 μm. The membrane may be sterilized by in-line steaming or autoclaving up to 135°C, 30 psig, for 45 minutes. Integrity testing of the membrane may be determined by either the diffusional flow or the bubble point test.
larger than 0.1 μm. The membrane may be sterilized by in-line steaming or autoclaving up to 135°C, 30 psig, for 45 minutes. Integrity testing of the membrane may be determined by either the diffusional flow or the bubble point test.
기타 정보
Directions for Use
- Organism Retention: Microorganism
- Mode of Action: Filtration
- Application: Microfiltration
- Intended Use: Reduction or removal of microorganism
- Instructions for Use: The 0.1 μm pore size hydrophilic membrance removes particles and microorganisms larger than 0.1 μm in size.
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
법적 정보
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.