CRK103006

Polygard^® CR Cartridge Filter

pore size 0.1 μm, cartridge nominal length 30 in. (75 cm), Code 0 (2-222; O-rings)

• 동의어(들): Polygard-CR Cartridge Filter 30 in. 0.1 μm Code 0 Silicone
• UNSPSC 코드: 23151806
• eCl@ss: 32031690

속성

• material: polypropylene ; silicone seal
• Quality Level: 400
• 특징: hydrophilic
• 제조업체/상표: Polygard
• 파라미터: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• 카트리지 공칭 길이: 30 in. (75 cm)
• 직경: 7.0 cm (2.75 in.)
• 불순물: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• 중량 추출물: ≤50 mg
• 공극 크기: 0.1 μm nominal pore size; 0.1 μm pore size
• 입력: sample type liquid
• 카트리지 코드: Code 0 (2-222; O-rings)

설명

일반 설명

The Polygard^® CR Cartridge Filter products are nominally rated filters designed for particle removal applications in liquids and gases. The graded-density depth structure of Polygard-CR filter media provides maximum filtration capacity, a 0.1 μm pore size and the all-polypropylene construction offers low extractables levels and broad chemical compatibility.

Polygard-CR cartridge filters provide high throughput with 4.8 bar max. differential pressure (70 psid) at 25 °C.

Typical Applications
Polygard-CR high-efficiency cartridge filters, composed of graded density polypropylene media are widely used in the beverage industry for liquid and gas filtration applications to protect tighter filters.

Regulatory Compliance
Polygard^® CR Cartridge Filters are designed, developed, and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO 9000 Quality Systems Standard and are shipped with a Certificate of Quality. Each cartridge filter is supported by a Validation Guide for compliance with regulatory requirements.

For traceability and easy identification, each filter is marked with identifying characteristics.

Multiple Formats Available
Polygard-CR product line offers a full range of filtration areas is available to suit varying application requirements. A variety of connection options are offered for easy adaptation to existing housings.

These devices have been developed to minimize hold-up volume when evaluating multiple media configurations.

제조 메모

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

분석 메모

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥15 L

법적 정보

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany