コンテンツへスキップ
Merck
  • Nanocoating of titanium implant surfaces with organic molecules. Polysaccharides including glycosaminoglycans.

Nanocoating of titanium implant surfaces with organic molecules. Polysaccharides including glycosaminoglycans.

Journal of biomedical nanotechnology (2012-10-04)
Katarzyna Gurzawska, Rikke Svava, Niklas Rye Jørgensen, Klaus Gotfredsen
要旨

Long-term stability of titanium implants are dependent on a variety of factors. Nanocoating with organic molecules is one of the method used to improve osseointegration. Nanoscale modification of titanium implants affects surface properties, such as hydrophilicity, biochemical bonding capacity and roughness. This influences cell behaviour on the surface such as adhesion, proliferation and differentiation of cells as well as the mineralization of the extracellular matrix at the implant surfaces. The aim of the present systematic review was to describe organic molecules used for surface nanocoating with focus on polysaccharides including glycosaminoglycans, and how these molecules change surface properties, cell reactions and affect on osseointegartion. The included in vitro studies demonstrated increased cell adhesion, proliferation and mineralization of a number of the tested polysaccharide nanocoatings. The included in vivo studies, showed improvement of bone interface reactions measured as increased Bone-to-Implant Contact length and Bone Mineral Density adjacent to the polysaccharide coated surfaces. Based on existing literature, surface modification with polysaccharide and glycosaminoglycans appears to be an effective way to stimulate bone regeneration on bone-implant interface.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
チタン, foil, thickness 0.127 mm, 99.7% trace metals basis
Sigma-Aldrich
チタン, powder, <45 μm avg. part. size, 99.98% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
チタン, powder, −100 mesh, 99.7% trace metals basis
Sigma-Aldrich
チタン, sponge, 1-20 mm, 99.5% trace metals basis
Sigma-Aldrich
チタン, wire, diam. 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 2.0 mm, 99.7% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.025 mm, 99.98% trace metals basis
チタン, mesh, 100x100mm, nominal aperture 0.19mm, wire diameter 0.23mm, 60x60 wires/inch, open area 20%, twill weave
Sigma-Aldrich
チタン, foil, thickness 0.5 mm, 99.99% trace metals basis
Sigma-Aldrich
チタン, sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.995% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.127 mm, ≥99.99% trace metals basis
チタン, mesh, 100x100mm, nominal aperture 4.3mm, wire diameter 1.5mm, 4.4x4.4 wires/inch, open area 94%, platinized diamond mesh
Sigma-Aldrich
チタン, wire, diam. 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.25 mm, 99.99% trace metals basis
Sigma-Aldrich
チタン, 5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)
Sigma-Aldrich
チタン, wire, diam. 0.5 mm, 99.99% trace metals basis
チタン, rod, 10mm, diameter 50mm, 99.99+%
Sigma-Aldrich
チタン, wire, diam. 0.81 mm, 99.7% trace metals basis
チタン, tube, 1000mm, outside diameter 10.3mm, inside diameter 8.7mm, wall thickness 0.8mm, annealed, 99.6+%
チタン, sphere, 200pcs, diameter 3mm, 99.6+%
チタン, wire, straight, 1000mm, diameter 1.0mm, as drawn, 99.6+%
Sigma-Aldrich
チタン, evaporation slug, diam. × L 6.3 mm × 6.3 mm, ≥99.99% trace metals basis
チタン, tube, 200mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+%
チタン, tube, 200mm, outside diameter 2.03mm, inside diameter 1.63mm, wall thickness 0.2mm, annealed, 99.6+%
チタン, tube, 500mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+%
チタン, tube, 100mm, outside diameter 0.51mm, inside diameter 0.35mm, wall thickness 0.08mm, annealed, 99.6+%
チタン, rod, 100mm, diameter 6mm, annealed, 99.6+%
チタン, tube, 500mm, outside diameter 3.0mm, inside diameter 1.5mm, wall thickness 0.75mm, annealed, 99.6+%
チタン, wire reel, 2m, diameter 1.0mm, as drawn, 99.99+%