CN1H72E06

Polygard^® CNカートリッジフィルター

pore size 10.0 μm, cartridge nominal length 20 in. (50 cm), Code 7 (2-226; O-rings w/locking-tabs)

• 別名: Polygard-CN Cartridge Filter 20 in. 10.0 µm Code 7 Ethylene-Propylene
• UNSPSCコード: 23151806
• eCl@ss: 32031690

特性

• 物質: EPR seal; polypropylene
• 品質水準: 400
• 特徴: hydrophilic
• メーカー／製品名: Polygard
• パラメーター: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• カートリッジの長さ（公称）: 20 in. (50 cm)
• 直径: 7.0 cm (2.75 in.)
• ろ過面積: 0.84 m²
• 不純物: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• 重量分析抽出物: ≤100 mg
• ポアサイズ: 10.0 μm nominal pore size; 10.0 μm pore size
• 入力: sample type liquid
• カートリッジコード: Code 7 (2-226; O-rings w/locking-tabs)

詳細

詳細

The Polygard-CN Cartridge Filter 20 in. 10.0 μm Code 7 Ethylene-Propylene products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard^®-CN filter media minimizes pressure differentials during the filtration process, a 10.0 μm pore size and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Polygard-CN cartridge filters provide high throughput with 4.8 bar max. differential pressure (70 psid) at 25 °C Cartridges are robust, strong, resilient and are designed to withstand multiple steam-in-place cycles.

Typical Applications
Polygard-CN cartridge filters are widely used in the beverage industry for liquid and gas filtration applications, for fining operations and bioburden reduction.

Regulatory Compliance
Polygard-CN Cartridge Filter 20 in. 10.0 μm Code 7 Ethylene-Propylenes are designed, developed, and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO 9000 Quality Systems Standard and are shipped with a Certificate of Quality. Each cartridge filter is supported by a Validation Guide for compliance with regulatory requirements.

For traceability and easy identification, each cartridge filter is marked with identifying characteristics.

Multiple Formats Available
A full range of Polygard-CN Cartridge Filter 20 in. 10.0 μm Code 7 Ethylene-Propylene sizes is available to suit your application requirements. A variety of connection options are offered for easy adaptation to existing housings.

調製ノート

Sanitization Protocol
80 °Cで30 分 熱水殺菌

Sterilization Method
126 °C 30 分のオートクレーブ滅菌またはSIP滅菌10回

アナリシスノート

次の水でフラッシング後USP Oxidizable Substances Testに適合 ≥10 L

Gravimetric Extractables: after 24-h soak in water

その他情報

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

法的情報

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany