According to the product management, only the PEGA resin with a 35KDa cut-off is available, and they are unable to produce custom resins.
Quality Segment
product line
Novabiochem®, PEGA
form
beads
reaction suitability
reaction type: Fmoc solid-phase peptide synthesis
manufacturer/tradename
Novabiochem®
application(s)
peptide synthesis
functional group
amine
storage temp.
2-8°C
General description
PEGA resins consist of dimethyl acrylamide and mono-2-acrylamidoprop-1-yl[2-aminoprop-1-yl] polyethylene glycol cross-linked with bis 2-acrylamidoprop-1-yl polyethyleneglycol. These supports swell extensively in a wide range of solvents and are permeable to macromolecules up to 35 kD, making them ideal for the preparation of combinatorial libraries, affinity purification and on-resin enzyme assays. For applications of these resins in SPPS and SPOS see [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18].Note: PEGA resins are supplied swollen in ethanol, with 1g dry resin corresponding to approximately 15 mL of swollen resin. As the beads of PEGA resins become very sticky and easily damaged when shrunk or dried, they are best handled in a swollen state. To use, the appropriate amount of swollen resin should be weighed into a reaction vessel and any residual ethanol removed by copious washings with the appropriate solvent or solvent mixture. After peptide assembly, the resin should be washed with DCM and transferred to the cleavage vessel. Excess DCM can be removed under vacuum, and the shrunk resin treated with the TFA cocktail. The characteristics of the swollen resin, its robustness and high permeability enables its use in both batch and continuous flow synthesis apparatus.
Associated Protocols and Technical Articles
Protocols for Loading of Peptide Synthesis Resins Literature references
Literature references
[1] M. Meldal, et al. (1992) Tetrahedron Lett., 33, 3077.
[2] F. I. Auzanneau, et al. (1994) J. Peptide Sci., 1, 31.
[3] M. Meldal in ′Peptides 1992, Proc. 22nd European Peptide Symposium′, C. H. Schneider & A. N. Eberle (Eds), ESCOM, Leiden, 1993, pp.61.
[4] M. Meldal, et al. in ′Innovation & Perspectives in Solid Phase Synthesis, 3rd International Symposium′, R. Epton (Eds), Mayflower Worldwide, Birmingham, 1994, pp. 259.
[5] M. Meldal, et al. (1993) Int. J. Peptide Protein Res., 41, 250.
[6] M. Meldal, et al. (1994) J. Chem. Soc., Chem. Commun., 849.
[7] M. Meldal, et al. (1994) Proc. Natl. Acad. Sci. USA, 91, 3314.
[8] M. Renil, et al. (1998) J. Peptide Sci., 4, 195.
[9] J. C. Spetzler, et al. (1998) J. Peptide Sci., 4,128.
[10] M. Meldal, et al. (1998) J. Peptide Sci., 4 ,83.
[11] J. A. Camarero, et al. (1998) J. Peptide Res., 51, 303.
[12] J. A. Camarero, et al. (2000) Lett. Pept. Sci., 7,17.
[13] O. Melnyk, et al. (2001) J. Org. Chem., 66, 4153.
[14] J. Buchardt, et al. (2000) J. Comb. Chem., 2, 624.
[15] J. F. Tolberg, et al. (2002) J. Org. Chem., 67, 4143.
[16] J. Bondebjerg, et al. (2002) J. Am. Chem. Soc., 124, 11046.
[17] J. Tulla-Puche, et al. (2004) J. Org. Chem., 69, 4101.
[18] S. Aggarwal, et al. (2005) Biomaterials, 26, 6077.
Associated Protocols and Technical Articles
Protocols for Loading of Peptide Synthesis Resins Literature references
Literature references
[1] M. Meldal, et al. (1992) Tetrahedron Lett., 33, 3077.
[2] F. I. Auzanneau, et al. (1994) J. Peptide Sci., 1, 31.
[3] M. Meldal in ′Peptides 1992, Proc. 22nd European Peptide Symposium′, C. H. Schneider & A. N. Eberle (Eds), ESCOM, Leiden, 1993, pp.61.
[4] M. Meldal, et al. in ′Innovation & Perspectives in Solid Phase Synthesis, 3rd International Symposium′, R. Epton (Eds), Mayflower Worldwide, Birmingham, 1994, pp. 259.
[5] M. Meldal, et al. (1993) Int. J. Peptide Protein Res., 41, 250.
[6] M. Meldal, et al. (1994) J. Chem. Soc., Chem. Commun., 849.
[7] M. Meldal, et al. (1994) Proc. Natl. Acad. Sci. USA, 91, 3314.
[8] M. Renil, et al. (1998) J. Peptide Sci., 4, 195.
[9] J. C. Spetzler, et al. (1998) J. Peptide Sci., 4,128.
[10] M. Meldal, et al. (1998) J. Peptide Sci., 4 ,83.
[11] J. A. Camarero, et al. (1998) J. Peptide Res., 51, 303.
[12] J. A. Camarero, et al. (2000) Lett. Pept. Sci., 7,17.
[13] O. Melnyk, et al. (2001) J. Org. Chem., 66, 4153.
[14] J. Buchardt, et al. (2000) J. Comb. Chem., 2, 624.
[15] J. F. Tolberg, et al. (2002) J. Org. Chem., 67, 4143.
[16] J. Bondebjerg, et al. (2002) J. Am. Chem. Soc., 124, 11046.
[17] J. Tulla-Puche, et al. (2004) J. Org. Chem., 69, 4101.
[18] S. Aggarwal, et al. (2005) Biomaterials, 26, 6077.
Application
- Fluorescence-Based On-Resin Detection of Three Model Proteases: Discusses the use of Amino PEGA resin modified with backbone amide linker (BAL) for developing solid support-bound probes used in fluorescence-based assays. (Milicevic & Hlavác, 2021).
- Attachment of cyclodextrin acids to PEGA resin and study of binding with fluorescence microscopy: Investigates the attachment of cyclodextrin to amino PEGA resin and evaluates their binding interactions using fluorescence microscopy. (Langhorn et al., 2021).
Analysis Note
Color (visual): white to yellow to beige
Appearance of substance (visual): beads
Loading (determined from the substitution of the Fmoc-Leu loaded resin): 0.30 - 0.50 mmol/g
Swelling Volume (in DMF): lot specific result
Swelling Volume (in water): lot specific result
dry resin %: lot specific result
The resin is sold swollen in ethanol. 50 - 100 mesh
Appearance of substance (visual): beads
Loading (determined from the substitution of the Fmoc-Leu loaded resin): 0.30 - 0.50 mmol/g
Swelling Volume (in DMF): lot specific result
Swelling Volume (in water): lot specific result
dry resin %: lot specific result
The resin is sold swollen in ethanol. 50 - 100 mesh
Other Notes
Replaces: 01-64-0100
Legal Information
Novabiochem is a registered trademark of Merck KGaA, Darmstadt, Germany
保管分類
11 - Combustible Solids
wgk
nwg
flash_point_f
Not applicable
flash_point_c
Not applicable
適用法令
試験研究用途を考慮した関連法令を主に挙げております。化学物質以外については、一部の情報のみ提供しています。 製品を安全かつ合法的に使用することは、使用者の義務です。最新情報により修正される場合があります。WEBの反映には時間を要することがあるため、適宜SDSをご参照ください。
8550150000: + 8550150001: + 8550150005: + 8550159999:
jan
-
Is there a PEGA resin product with a larger molecular weight cut-off than the Amino PEGA resin material (Cat no. 8550150005)? Can custom synthesis be done to achieve a larger molecular weight cut-off? What is the current molecular weight of the PEG used in the synthesis, as increasing the molecular weight of the PEG should allow for larger molecular weight cut-offs?
1 回答-
役に立ちましたか？
-