ZIQEP0D00

E-POD^® Pure Water Remote Dispenser

For use with Milli-Q^® IQ & IX 7003/05/10/15, Intelligent pure water dispenser

• UNSPSC Code: 41104200
• NACRES: JA.13

Properties

• packaging: pkg of 1 unit
• manufacturer/tradename: E-POD^®
• parameter: 2 L/min flow rate; 5.5 kg operating weight
• H × D × W: 27.6 in. × 10.6 in. × 8.3 in.
• input: potable tap water
• output: type 2 water (> 5 MΩ·cm) (25°C)
• conductivity: 0.2 μS/cm at 25 °C (water output)
• compatibility: for use with Milli-Q^® IX 7003; for use with Milli-Q^® IX 7005; for use with Milli-Q^® IX 7010; for use with Milli-Q^® IX 7015; for use with Milli-Q^® IQ 7003; for use with Milli-Q^® IQ 7005; for use with Milli-Q^® IQ 7010; for use with Milli-Q^® IQ 7015

Description

General description

Always have rapid and convenient access to pressurized Type 2 pure water. This ergonomic dispenser is compact and intuitive to use, supporting an efficient working environment. Essential system functions remain close at hand on the E-POD^® touchscreen interface.

Application

The E-POD^® remote dispenser is designed to provide dispensing Type 2 pure water flexibility, with variable flow rates and volumetric dispensing.

Features and Benefits

• One E-POD^® dispenser can be connected to a Milli-Q^® IQ 7003/05/10/15 water purification system.
• Two E-POD^® dispensers can be connected to a Milli-Q^® IX 7003/05/10/15 water purification system.
• Provides pressurized pure water, up to 2 L/min.
• 3 different final filters can be connected to target specific contaminants and remove them right when dispensing pure water.
• 5” touchscreen with bright, colored LCD display is easy to read and convenient to use, even with gloves on. It is located at eye level and orientable (120°).
• Navigation in operating and dispensing modes is intuitive, without spending time going through multiples menus to find the information.
• Graphic icons on the display allow all users to quickly and easily operate the system.
• Comprehensive information displayed on the screen (water quality, system status, tank level, operating mode, volume dispensed) allows to always dispense the expected water quality.
• Two modes to dispense pure water:

Variable flow (2 different flows, thanks to the dispensing wheel: low flow and full flow up to 2 L/min).
Volumetric water dispensing automatically delivers a specific water volume, from 20 mL to 100 L (in 1 mL increments).

• The water dispenser has more than 1,500 positions (up to 30 horizontal notched positions, 360° around, and 54 vertical notched positions). Hence, daily operations are easier because the dispenser is well adapted to the size and shape of all the containers used in the laboratory.
• Can be installed on a wall-mounted horizontal articulated extension, allowing for maximum bench space.

Legal Information

E-POD is a registered trademark of Merck KGaA, Darmstadt, Germany

Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany