Incorrect installation and use of materials as the cause of a severe air pollution incident in a school building.

Incorrect installation and use of materials as the cause of a severe air pollution incident in a school building.

The Science of the total environment (2014-05-03)

Rocco Rella, Alberto Sturaro, Alvise Vianello

RESUMEN

The proofing treatment of the floor slabs with a solvent based material and successive treatment with epoxy resin resulted in significant air contamination in a primary school. The contamination caused illnesses in many occupants of school. The GC/MS investigations of the air showed the presence of indane and other aromatic solvents, which was unusual as they are not correlated to outdoor pollution and derived from inner layers of the new flooring. The total concentration of these chemicals in air was in the order of several mg/m(3).

MATERIALES

Referencia del producto

Marca

Descripción del producto

RAD130

radiello^™ Adsorbentes de cartucho, for sampling BTEX and VOCs (CS₂ Desorption), matrix SS net (100 mesh, 5.8 mm diam.), activated with activated charcoal (30-50 mesh), pk of 20

RAD121

radiello^™ Triangular Support Plate, pk of 20

RAD165

radiello^™ Adsorbentes de cartucho, for sampling Aldehydes, matrix SS net with 2,4-DNPH coated FLORISIL^®, pk of 20

RAD120

radiello^™ Diffusive Bodies, white, configured for general use, pk of 20

RAD168

radiello^™ Adsorbentes de cartucho, for sampling Ammonia (NH₃), matrix microporous PE impregnated with phosphoric acid, pk of 20

RAD1202

radiello^™ Diffusive Bodies, yellow, configured for reduced sampling rates, pk of 20

RAD1201

radiello^™ Diffusive Bodies, blue, configured for sampling light sensitive compounds, pk of 20

RAD145

radiello^™ Adsorbentes de cartucho, for sampling BTEX and VOCs (thermal desorption), matrix SS net (3 x 8 μm, 4.8 mm diam.), Carbograph, pk of 20

RAD171

Supelco

radiello^™ Methylene Blue Calibration Standard for H₂S (Hydrogen Sulfide), pkg of 100 mL

RAD196

radiello^™ Outdoor Shelter, pk of 10

RAD122

radiello^™ Vertical Adapter, threaded for standard use, pk of 20

RAD190

radiello^™ Barcode Labels, pk of 198

RAD130S

radiello^™ BTEX/VOC Starter Kit, CS2 Desorption

RAD132

radiello^™ Adsorbentes de cartucho, for sampling Anaesthetic Gases/Vapors, matrix SS net with mix of mol sieve and activated charcoal (30-50 mesh), pk of 20

RAD145S

radiello^™ BTEX/VOC Starter Kit, Thermal Desorption

RAD407

Supelco

radiello^™ BTEX Calibration Kit (Thermal Desorption)

RAD174

radiello^™ Filtration Kit, pk of 20

RAD170S

radiello^™ Hydrogen Sulfide Starter Kit

RAD147

radiello^™ Adsorbentes de cartucho, for sampling Phenolic Compounds (thermal desorption), matrix SS net (100 mesh, 4.8 mm diam.), Tenax-TA, pk of 20

RAD1992

radiello^™ Empty Storage Tubes, polypropylene (with stopper), volume 12 mL, pk of 100

RAD126

radiello^™ On-Field Thermometer, Includes one standard Radiello vertical adapter (RAD122) for each thermometer, configured for standard use, pk of 3

RAD125

radiello^™ Anesthetic Gases and Vapor Sampler

RAD405

Supelco

radiello^™ BTEX Calibration Kit (CS₂ Desorption)

RAD1991

radiello^™ Empty Storage Tubes, glass (with stopper), volume 2.8 mL, pk of 100

RAD141S

radiello^™ 1,3-Butadiene Starter Kit, Thermal Desorption, pkg of 1 kit (2 RAD141 adsorbing cartridges and barcode labels, 1 RAD1202 yellow diffusive body, 1 RAD121 triangular support plate, 1 instruction sheet)

RAD195

radiello^™ Clips, suspending Radiello triangular support plate, pk of 20

RAD1203

radiello^™ Diffusive Bodies, permeative, configured for anaesthetic gases and vapors, pk of 20

RAD127

radiello^™ On-Field Thermometer, Reader, pk of 1

RAD198

radiello^™ Replacement Mounting Strips, for use with Radiello Outdoor Shelter, pk of 100