Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

47932

Supelco

EPA 524.2 VOC Mix

200 μg/mL each component in methanol, analytical standard

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Código UNSPSC:
12000000
En este momento no podemos mostrarle ni los precios ni la disponibilidad

grado

analytical standard

Nivel de calidad

300

Agency

EPA 502.2,524.1,524.2

CofA

current certificate can be downloaded

Características

standard type calibration

envase

ampule of 1 mL

concentración

200 μg/mL each component in methanol

técnicas

HPLC: suitable
gas chromatography (GC): suitable

aplicaciones

environmental

Formato

multi-component solution

temp. de almacenamiento

2-8°C

Descripción general

EPA 502/524.2 VOC Mix can be used for identifying and quantifying volatile halogenated organics and other volatile organics in drinking water. The analyst may be better equipped to choose between gas chromatography (GC) with a selective detector or gas chromatography/mass spectrometry (GC/MS) or high performance liquid chromatography (HPLC) as a preferred method of quantification. For US only, for EU: Cat. No. 32813.

Aplicación

Refer to the product′s Certificate of Analysis for more information on a suitable instrument technique. Contact Technical Service for further support.

Analito

Descripción
    Benzene
    Bromobenzene
    Bromochloromethane
    Bromodichloromethane
    Bromoform
    Bromomethane
    Butylbenzene
    sec-Butylbenzene
    tert-Butylbenzene
    Carbon tetrachloride
    Chloroethane
    Chloroform
    Chloromethane
    2-Chlorotoluene
    4-Chlorotoluene
    Dibromochloromethane
    1,2-Dibromo-3-chloropropane
    1,2-Dibromoethane
    Dibromomethane
    1,2-Dichlorobenzene
    1,3-Dichlorobenzene
    1,4-Dichlorobenzene
    Dichlorodifluoromethane
    1,1-Dichloroethane
    1,2-Dichloroethane
    1,1-Dichloroethylene
    cis-1,2-Dichloroethylene
    trans-1,2-Dichloroethylene
    Dichloromethane
    1,2-Dichloropropane
    1,3-Dichloropropane
    2,2-Dichloropropane
    1,1-Dichloro-1-propene
    cis-1,3-Dichloropropene
    trans-1,3-Dichloropropene
    Ethylbenzene
    Hexachloro-1,3-butadiene
    Naphthalene
    Propylbenzene
    Styrene
    1,1,1,2-Tetrachloroethane
    1,1,2,2-Tetrachloroethane
    Tetrachloroethylene
    Toluene
    1,2,3-Trichlorobenzene
    1,1,1-Trichloroethane
    1,1,2-Trichloroethane
    Trichloroethylene
    Trichlorofluoromethane
    1,2,3-Trichloropropane
    1,2,4-Trimethylbenzene
    Vinyl chloride
    1,2,4-Trichlorobenzene
    Cumene
    1,3,5-Trimethylbenzene solution
    o-Xylene
    m-Xylene
    p-Cymene
    p-Xylene
    Ver todo (59)

Aplicación

Referencia del producto
Descripción
Precios

Palabra de señalización

Danger

Punto de inflamabilidad (°F)

closed cup

Punto de inflamabilidad (°C)

closed cup

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
LC21473V
LC18642V
LC16108V
LC12871V
LC12561V

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Chromatograms

suitable for GC, application for SPME

Questions

1–2 of 2 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico