In-situ polymerization usually starts with monomer, not polymer. While 578177 is polypyrrole, not pyrrole. Here is a reference paper that might be helpful: https://pubs.acs.org/doi/10.1021/acsomega.2c00327
578177
Polypyrrole
doped, conductivity 0.5-1.5 S/cm (pressed pellet, typical), extent of labeling: ~5 wt. % loading, coated on titanium dioxide
Sinónimos:
PPy
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Número de CAS:
Número MDL:
Código UNSPSC:
12352103
ID de la sustancia en PubChem:
NACRES:
NA.23
En este momento no podemos mostrarle ni los precios ni la disponibilidad
Productos recomendados
Nivel de calidad
Formulario
solid
contiene
proprietary organic sulfonic acid as dopant
Extensión del etiquetado
~5 wt. % loading
solubilidad
H2O: insoluble
organic solvents: insoluble
cadena SMILES
[nH]1cccc1
InChI
1S/C4H5N/c1-2-4-5-3-1/h1-5H
Clave InChI
KAESVJOAVNADME-UHFFFAOYSA-N
¿Está buscando productos similares? Visita Guía de comparación de productos
Descripción general
Process up to at least 170°C in air. Process up to at least 270°C under nitrogen.Polypyrrole (PPy) is a conductive and highly stable polymer. It may be prepared by standard electrochemical technique.[1] PPy may also be prepared by reacting β-napthalene sulfonic acid (NSA) and ammonium peroxo-disulphate in aqueous medium.[2] The charges on the surfaces can be easily modified by doping the polymer during its synthesis.[1] Solubility and conductivity measurements of PPy doped with camphor sulfonic and dodecyl benzene sulfonic acid has been reported. [3]
Aplicación
Conducting polymer.
Conductive additive for thermoplasitics and thermosets.
Envase
Packaged in glass bottles
Código de clase de almacenamiento
13 - Non Combustible Solids
Clase de riesgo para el agua (WGK)
WGK 3
Punto de inflamabilidad (°F)
Not applicable
Punto de inflamabilidad (°C)
Not applicable
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Electrical regulation of olfactory ensheathing cells using conductive polypyrrole/chitosan polymers.
Fengyu Qi et al.
Biomaterials, 34(7), 1799-1809 (2012-12-12)
Electrical stimulation (ES) applied to a conductive nerve graft holds the great potential to improve nerve regeneration and functional recovery in the treatment of lengthy nerve defects. A conductive nerve graft can be obtained by a combination of conductive nerve
Gusphyl A Justin et al.
Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Annual Conference, 2012, 1206-1209 (2013-02-01)
An electronically-controlled drug delivery system (eDDS) for the on-demand release of anti-inflammatory, anti-microbial and analgesic agents to aid in wound healing is currently under development. The loading of several drugs into conductive polymer films and their subsequent on-demand, controlled release
Chemical Synthesis and Morphology of b?Naphthalene Sulfonic Acid-Doped Polypyrrole Micro/Nanotube.
Akinyeye R, et al.
Fullerenes, Nanotubes, and Carbon Nanostructures, 14 (2006)
Youe Zhou et al.
Journal of chromatography. B, Analytical technologies in the biomedical and life sciences, 915-916, 46-51 (2013-01-19)
Nanosized carbon based sorbents have been widely used for separation, enrichment and desalting of biological samples because of their distinguished characteristics. In this work, magnetic nanoparticles of nitrogen enriched carbon (mnNEC) have been developed for enrichment of organochlorine pesticide DDT
F Valentini et al.
Biosensors & bioelectronics, 43, 75-78 (2013-01-02)
A glucose biosensor was assembled using gold microelectrodes (diameter of 250 μm) coated by Single-Walled Carbon Nanotubes (SWCNTs), via the Electrophoresis Deposition Process (EPD). This nanostructured platform was successfully used to deposit the poly(pyrrole)/glucose oxidase film (PPy/GOx). The most important
Artículos
The application of conducting polymers at the interface with biology is an exciting new trend in organic electronics research.
Self-healing soft electronic materials offer potential cost savings and reduced electronic waste.
Self-healing soft electronic materials offer potential cost savings and reduced electronic waste.
Self-healing soft electronic materials offer potential cost savings and reduced electronic waste.
-
i want to coat this polymer on cotton substrate through in-situ polymerization. but it is insoluble in water. can you help me with the process of in-situ polymerization.
1 answer-
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
