The molecular weight of this product is not determined. However, historical data indicates an overall molecular weight of approximately 280,000 daltons. There is a ratio of 1:2.5 for PEDOT:PSS.
483095
PEDOT:PSS
conductive grade, 1.3 wt. % aqueous dispersion
Sinónimos:
PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
En este momento no podemos mostrarle ni los precios ni la disponibilidad
Productos recomendados
Nombre del producto
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), 1.3 wt % dispersion in H2O, conductive grade
grado
conductive grade
composición
PEDOT content, 0.5 wt. %
PSS content, 0.8 wt. %
características de los productos alternativos más sostenibles
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.
sustainability
Greener Alternative Product
concentración
1.3 wt % dispersion in H2O
anchura de banda
1.6 eV
conductividad
1 S/cm
categoría alternativa más sostenible
temp. de almacenamiento
2-8°C
¿Está buscando productos similares? Visita Guía de comparación de productos
Descripción general
A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices.[1] High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.[2][3] Impact of small electric and magnetic fields on the polymer was studied.[4]
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Aplicación
PEDOT:PSS polymeric films have been used as a charge dissipation layer in electron-beam lithography and focused ion beam milling. Sample preparation has been reported to be easier and quicker for various substrates, including gallium nitride (GaN) on sapphire (Al2O3) substrates, zinc oxide (ZnO), fused silica, lithium niobate (LiNbO3), silicon carbide (SiC) and diamond (C),[5] spin-coated onto the ITO coated glass substrate.[6] PEDOT: PSS layers have also been reported to be used as anode buffer layer for organic solar cells[2] and as replacements for the transparent conductive coatings of organic solar cells.[7] Various studies report the use of metal modified conductive grade PEDOT: PSS as an anode buffer layer in solar cells, example: copper phthalocyanine/fullerene-based solar cells [2][3][6]4 Conductive PEDOT:PSS combined with polyvinylidene fluoride (PVDF) membranes may be used to prepare PEDOT:PSS-PVDF ionic liquid soft actuators.[8] The function of PEDOT:PSS as a pseudocapacitive material was investigated. [9]
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Características y beneficios
Antistat coating for plastic and glass.
Envase
Packaged in glass bottles
Palabra de señalización
Danger
Frases de peligro
Consejos de prudencia
Clasificaciones de peligro
Eye Dam. 1 - Skin Corr. 1
Clase de riesgo para el agua (WGK)
WGK 2
Equipo de protección personal
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
Lot/Batch Number
¿No ve la versión correcta?
Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
PEDOT: PSS layers as replacements for the transparent conductive coatings of organic solar cells.
Schwertheim S, et al.
Photovoltaic Specialists Conference, 1991., Conference Record of the Twenty Second IEEE (2010)
Conductive Polymers for Advanced Micro- and Nano-fabrication Processes
<B>Dylewicz R, et al.</B>
Material Matters, 6(1) null
Faramarz Hossein-Babaei et al.
Scientific reports, 7, 42299-42299 (2017-02-17)
Many gaseous markers of critical biological, physicochemical, or industrial occurrences are masked by the cross-sensitivity of the sensors to the other active components present at higher concentrations. Here, we report the strongly selective diffusion and drift of contaminant molecules in
Yi-Kuang Yen et al.
Nanomaterials (Basel, Switzerland), 10(12) (2020-12-12)
Detecting the concentration of Pb2+ ions is important for monitoring the quality of water due to it can become a health threat as being in certain level. In this study, we report a nanomechanical Pb2+ sensor by employing the complementary
Viet Cuong Nguyen et al.
Scientific reports, 6, 19594-19594 (2016-01-26)
We study resistive switching memory phenomena in conducting polymer PEDOT PSS. In the same film, there are two types of memory behavior coexisting; namely, the switchable diode effect and write once read many memory. This is the first report on
Artículos
Sigma-Aldrich tutorial on lithography nanopatterning explains patterning layers for conductors, semiconductors, and dielectrics on surfaces.
Sigma-Aldrich tutorial on lithography nanopatterning explains patterning layers for conductors, semiconductors, and dielectrics on surfaces.
Sigma-Aldrich tutorial on lithography nanopatterning explains patterning layers for conductors, semiconductors, and dielectrics on surfaces.
Lithography, based on traditional ink-printing techniques, is a process for patterning various layers, such as conductors, semiconductors, or dielectrics, on a surface.
-
What is the respective molecular weight of PEDOT and PSS in this product (PEDOT:PSS 483095)
1 answer-
Helpful?
-
-
How can I determine the shelf life / expiration / retest date of this product?
1 answer-
If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdfHelpful?
-
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 answer-
Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
Helpful?
-
-
Is the water deionized water?
1 answer-
Deionized water is used in the formulation of this item.
Helpful?
-
-
Can I use this dispersion for making a PEDOT:PSS channel of OECT(Organic Electrochemical Transistor) using spin coating? Code -483095
1 answer-
PEDOT:PSS can be applied for spin coating and Organic Electrochemical Transistors (OECTs). Here is a paper working on PEDOT:PSS based OECTs: https://www.sciencedirect.com/science/article/pii/S095656632100138X.
Unfortunately, 483095 hasn't been tested for that application, but it is worth trying.Helpful?
-
-
Can the PDOT be filtered through a 0.45 μm memberane filter. How do you recommend the 483095-250G to be filtered ?
1 answer-
The filtration of PEDOT:PSS is not recommended. There are publications which suggest that this is possible, however customers have noted difficulty in filtration as well as separation.
Helpful?
-
-
You mentioned that deposited PEODT: PSS can withstand temperatures in excess of 200 degree celcius for a short duration. May I know how "short" it is? Is it for a few hours?
1 answer-
PEDOT:PSS films can withstand 200 °C for up to 12 hours.
Helpful?
-
-
Is this PEDOT:PSS, poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), product p-doped or n-doped?
1 answer-
This PEDOT:PSS product is based on hole-doped or P-type polymers. PEDOT can be n-doped, but the materials are too unstable to be of any commercial value.
Helpful?
-
-
What is the Department of Transportation shipping information for this product?
1 answer-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Helpful?
-
-
What is the temperature stability of this poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), PEDOT:PSS, product?
1 answer-
Deposited poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), PEDOT:PSS, films can easily withstand temperatures in excess of 200°C for short duration and around 70°C in continuous service. The aqueous dispersions of PEDOT:PSS, however, can be damaged by heating above 50°C for a prolonged period.
Helpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
