182427
Polystyrene
average Mw ~280,000 by GPC
Sinónimos:
PS
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Fórmula lineal:
[CH2CH(C6H5)]n
Número de CAS:
MDL number:
UNSPSC Code:
12162002
PubChem Substance ID:
NACRES:
NA.23
Productos recomendados
form
beads or pellets
Quality Level
mol wt
average Mw ~280,000 by GPC
refractive index
n20/D 1.5916
transition temp
Tg 100 °C
density
1.047 g/mL at 25 °C
InChI
1S/C8H8/c1-2-8-6-4-3-5-7-8/h2-7H,1H2
InChI key
PPBRXRYQALVLMV-UHFFFAOYSA-N
¿Está buscando productos similares? Visita Guía de comparación de productos
General description
Polystyrene is a high molecular weight aromatic synthetic polymer madefrom the polymerization of styrene. It is a hydrophobic durable thermoplasticwidely used in food containers, packaging foam, and construction materials dueto its good mechanical properties and low cost.
Application
Polystyrene can be added to nanocatalyst suspension to prepare a polystyrene-photocatalyst thick film. This film can be used as a photoanode in an airlift photocatalytic fuel cell (APFC).
Polystyrene can be used as a precursor to prepare graphene film and 3D graphene sponges by pyrolysis under argon atmosphere. The filmogenic property of polystyrene can be exploited to prepare 3D graphene sponges with uniform pore sizes.
It can also be used to prepare dyed polystyrene (PS) film for routine dosimetry in radiation processing. Dyed PS film has high post-irradiation stability.
Polystyrene can be used as a precursor to prepare graphene film and 3D graphene sponges by pyrolysis under argon atmosphere. The filmogenic property of polystyrene can be exploited to prepare 3D graphene sponges with uniform pore sizes.
It can also be used to prepare dyed polystyrene (PS) film for routine dosimetry in radiation processing. Dyed PS film has high post-irradiation stability.
Storage Class
11 - Combustible Solids
wgk_germany
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
ppe
Eyeshields, Gloves, type N95 (US)
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
Lot/Batch Number
¿No ve la versión correcta?
Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Alejandra Rendón-Patiño et al.
Nanomaterials (Basel, Switzerland), 9(1) (2019-01-19)
Polystyrene as a thin film on arbitrary substrates or pellets form defective graphene/graphitic films or powders that can be dispersed in water and organic solvents. The materials were characterized by visible absorption, Raman and X-ray photoelectron spectroscopy, electron and atomic
Ba Thanh Ho et al.
Critical reviews in biotechnology, 38(2), 308-320 (2017-08-03)
Polystyrene is a widely used plastic in many aspects of human life and in industries due to its useful characteristics of low cost, light weight, ease of manufacture, versatility, thermal efficiency, durability, and moisture resistance. However, polystyrene is very stable
Megan Farrell et al.
Colloids and surfaces. B, Biointerfaces, 81(2), 468-475 (2010-08-31)
Dextran and polyethylene glycol (PEG) are often covalently bound to the surface of polydimethylsiloxane (PDMS) for the purpose of modifying its hydrophilicity and biocompatibility. In this work, the effects of the dextran and PEG on the morphology, wetting, and surface
Ji Yeon Ahn et al.
Journal of chromatography. A, 1217(24), 3876-3880 (2010-05-05)
The separation efficiencies of three different asymmetrical flow field-flow fractionation (AF4) channel designs were evaluated using polystyrene latex standards. Channel breadth was held constant for one channel (rectangular profile), and was reduced either linearly (trapezoidal profile) or exponentially (exponential profile)
M Jönsson-Niedziółka et al.
Lab on a chip, 11(3), 490-496 (2010-11-26)
Environmental air monitoring is of great interest due to the large number of people concerned and exposed to different possible risks. From the most common particles in our environment (e.g. by-products of combustion or pollens) to more specific and dangerous
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico